All A.M.E.S. srl products
Kit, 25 steps, Easy System
Key features
- TypeKit for assembling ladders
- Equipment supplied50 90° square brackets, 50 step elements, 50 1 cm spacers, 50 3 cm spacers, 100 tie rods
What it is
Kit, 25 steps, Easy System. Key specifications: type Kit for assembling ladders.
Tile and slab spacers are cross spacers, wedges, levelling systems and pedestals that keep joints even and surfaces aligned during laying.
What it is for
Used for laying large-format slabs, where handling and flatness are the challenge and for laying tiles and slabs, from spreading the adhesive to grouting.
How to use it
Insert cross spacers and spacers between the tiles in the fresh adhesive to keep the joint width constant, and remove them before grouting. Place levelling clips under the slab edges and tighten them with a wedge or pliers until the slabs are aligned, then snap them off once the adhesive has set. Adjust raised floor pedestals by screwing the head up or down to the required level.
Where it is used
- Residential construction
- Renovation
Technical data
- Type: Kit for assembling ladders
Who it is for
Designed for tilers, floor layers and wall tiling and cladding fitters.
Related products
- Self-levelling spacer kit for tilers
- Step/tile element
- Rectangular sponge art. 870 — from the category Tile Laying and Grouting Tools
- Manual screed LEVELHANDY LH Probst — from the category Installation Products and Accessories
- Roof tile cutter item 42 — from the category Tile Cutting, Finishing and Shaping Tools
- Browse the whole category: Spacers for Floor Slabs and Tiles
Before you order
Tell us the quantities you need and the intended use: if there is a more suitable version, or an equivalent available sooner, we will let you know.
For prices and availability, request a quote from AMES Srl: we will reply with our quotation, delivery times and, where needed, an equivalent technical alternative.
Quantity
Specifications 3
| Item code | 725.180.10000 |
|---|---|
| Type | Kit for assembling ladders |
| Equipment supplied | 50 90° square brackets, 50 step elements, 50 1 cm spacers, 50 3 cm spacers, 100 tie rods |
The perfect setup for this job
Everything you need in one place, from functionality to safety.
For the job
A.M.E.S. srlStainless steel square-point trowels, art. 946/L
Spread, smooth and finish mortars, renders, adhesives and skim coats by hand.
SolaSilver spirit levels Sola AV
Check surfaces and levels and transfer measurements and alignments before laying or fixing.
For safety
A.M.E.S. srlBlack knee pads for trousers
Protect knees from pain and crushing when working kneeling on the ground.