PavanSmall trowel, square point, art. 980
Spread, smooth and finish mortars, renders, adhesives and skim coats by hand.
All A.M.E.S. srl products
Bricklayer's hammer 'MIX'
Also known as: brick hammer, mason's hammer
Key features
- Weight (kg)0,4
- MaterialWood
What it is
Bricklayer's hammer 'MIX'. Key specifications: weight (kg) 0,4, material Wood.
Special-purpose hammers include brick hammers, scutch hammers, mattocks and dead-blow or rubber-faced mallets with a head shaped for a specific job, such as bricklaying, rough dressing or alignment.
What it is for
Used for light demolition, chasing and localised removal, in masonry work, from laying blocks to filling chases and for chiselling concrete, masonry and plaster.
How to use it
Choose the hammer to suit the job: brick hammer or scutch hammer for splitting and trimming bricks and stone, mattock for grubbing out and demolition, dead-blow or rubber mallet for striking without rebound or marks. Check that the head is secure and strike with a firm wrist, keeping your hands away from the point of impact. Always wear safety glasses to protect against flying chips.
Where it is used
- Residential construction
- Renovation
Technical data
- Weight (kg): 0,4
- Material: Wood
Who it is for
Designed for marble and stone masons, bricklayers and construction workers.
Related products
- Watchmaker's hammer art. 386
- Installer's hammer
- Spade chisel, 28 mm, DeWalt DT6928-QZ — from the category Demolition Chisels
- Small stainless steel square-point trowel, art. 980/I — from the category Trowels, Spatulas and Floats
- Face shield Safe Mesh, nylon, Irudek — from the category Safety Glasses, Goggles and Face Shields
- Browse the whole category: Special-Purpose Hammers
Before you order
Tell us the quantities you need and the intended use: if there is a more suitable version, or an equivalent available sooner, we will let you know.
For prices and availability, request a quote from AMES Srl: we will reply with our quotation, delivery times and, where needed, an equivalent technical alternative.
Quantity
Specifications 3
| Item code | 720.400.05000 |
|---|---|
| Weight (kg) | 0,4 |
| Material | Wood |
The perfect setup for this job
Everything you need in one place, from functionality to safety.
For the job
A.M.E.S. srlFlat chisels, art. 35
Cut sheet metal, shear rivets and bolts and chip off deposits with hammer blows.
A.M.E.S. srlMason's plumb bobs
Check surfaces and levels and transfer measurements and alignments before laying or fixing.
For safety
A.M.E.S. srlGolf glove
Protect hands from abrasion, dirt, liquids and minor cuts while keeping a firm grip.