SDS+ rotary hammer 800W 2.4J Fatmax with double chuck (SFMEH210K-QS) Stanley

What it is

SDS+ rotary hammer 800W 2.4J Fatmax with double chuck (SFMEH210K-QS) Stanley. Key specifications: chuck type SDS+, impact energy J EPTA value 2,4, blows per minute 4670.

A rotary hammer drills concrete, masonry and stone by combining rotation and percussion, with an SDS-Plus, SDS-Max or compressed-air connection.

What it is for

Used for drilling reinforced concrete, in hammer or rotary hammer mode and for drilling solid and hollow masonry, clay brick and blocks.

How to use it

Use a detector to make sure there are no cables or pipes at the drilling point. Insert the clean, greased bit until it clicks, set the depth stop and select the operating mode. Drill with the tool held square to the surface using both hands, withdrawing the bit from time to time to clear the dust, and wear safety glasses, a dust mask and hearing protection.

Where it is used

• Building services
• Renovation

Technical data

• Chuck type: SDS+
• Impact energy J EPTA value: 2,4
• Blows per minute: 4670
• Max drilling capacity, masonry (mm): 26
• Max drilling capacity, metal (mm): 13
• Max drilling capacity, steel (mm): 13
• Max drilling capacity, wood (mm): 30
• Max drilling diameter, steel (mm): 13
• Max drilling diameter, wood (mm): 30
• No load speed (rpm): 1250
• No. of speed settings: 1
• Pack: Plastic case
• Absorbed power (W): 800
• Power supply: Wire type

Who it is for

Designed for demolition operatives, electricians, plumbers and bricklayers.

Related products

• SDS+ rotary hammer brushless 18V Fatmax - unit without battery and charger (FMCD900B) Stanley
• SDS+ rotary hammer 800W 2.4J Fatmax with double chuck (SFMEH210K) Stanley
• Compact rotary hammer SDS-Plus 16mm M18 Fuel with dedicated dust extraction unit (M18 Fhacdde) Milwaukee — from the category SDS Plus Rotary Hammers and Bits
• SDS Max XLR bit 32x380x250mm DeWalt DT60834-QZ — from the category SDS Max Drill Bits
• Plug with accessory BM 05 07 Bossong — from the category Heavy-Duty Anchors
• Browse the whole category: Rotary Hammers

Before you order

In your request, please state the diameter, the power rating and the quantities required, so we can give you the right quotation first time.

For prices and availability, request a quote from AMES Srl: we will reply with our quotation, delivery times and, where needed, an equivalent technical alternative.