Rotary hammer drill DH24PH2

What it is

Rotary hammer drill DH24PH2. Key specifications: weight (kg) 2,7, length (mm) 349, power (W) 730.

A rotary hammer drills concrete, masonry and stone by combining rotation and percussion, with an SDS-Plus, SDS-Max or compressed-air connection.

What it is for

Used for drilling reinforced concrete, in hammer or rotary hammer mode, for drilling solid and hollow masonry, clay brick and blocks and for chiselling concrete, masonry and plaster.

How to use it

Use a detector to make sure there are no cables or pipes at the drilling point. Insert the clean, greased bit until it clicks, set the depth stop and select the operating mode. Drill with the tool held square to the surface using both hands, withdrawing the bit from time to time to clear the dust, and wear safety glasses, a dust mask and hearing protection.

Where it is used

• Residential construction
• Building services
• Renovation

Technical data

• Weight (kg): 2,7
• Length (mm): 349
• Power (W): 730
• No load speed (rpm): 1050

Who it is for

Designed for electricians, plumbers, building maintenance operatives and bricklayers.

Related products

• Rotary hammer drill DH26PC2
• 4-mode rotary hammer RSDS680-K
• SDS-Plus drill bit and chisel set — from the category SDS Plus Rotary Hammers and Bits
• SDS-max/SDS-plus Adapter — from the category SDS Max Drill Bits
• Anchor FAZ II — from the category Heavy-Duty Anchors
• Browse the whole category: Rotary Hammers

Before you order

In your request, please state the length, the power rating and the quantities required, so we can give you the right quotation first time.

For prices and availability, request a quote from AMES Srl: we will reply with our quotation, delivery times and, where needed, an equivalent technical alternative.