A.M.E.S. srlSquares with wooden base SRH
Check and transfer right angles and bevels on wood, metal, tiles and masonry.
All A.M.E.S. srl products
Pencil with TM02 leads
Key features
- LeadGraphite, 2.8x120 mm
- Marking depth (mm)Up to 45
- Equipment suppliedBuilt-in sharpener, removable handle
- Spare partsPack of 6 graphite leads
What it is
Pencil with TM02 leads. Key specifications: lead Graphite, 2.8x120 mm, equipment supplied Built-in sharpener, removable handle, spare parts Pack of 6 graphite leads.
The marker is a felt-tip pen, carpenter's pencil, crayon, chalk or marking spray paint that leaves legible marks on wood, metal, masonry, asphalt and other site surfaces.
What it is for
Used for marking out lines, dimensions and reference points before work begins.
How to use it
Clean and dry the point to be marked, removing dust and oil. Draw with steady pressure, using a square or rule as a guide. Sharpen pencils with a knife or sharpener and replace leads when they are used up. Recap marker pens immediately after use to stop the ink drying out.
Where it is used
- Residential construction
- Renovation
Technical data
- Lead: Graphite, 2.8x120 mm
- Equipment supplied: Built-in sharpener, removable handle
- Spare parts: Pack of 6 graphite leads
Who it is for
Designed for formwork carpenters, joiners and bricklayers.
Related products
- Carpenter's pencil CPM
- Pencil with fine lead Pica Dry
- Combination square VK38 — from the category Squares
- Tape measure, metrica — from the category Tape Measures
- Marking powders (1-47-804) Stanley — from the category Chalk Lines and Marking Chalk
- Browse the whole category: Markers and Spray Markers
Before you order
Tell us the quantities you need and the intended use: if there is a more suitable version, or an equivalent available sooner, we will let you know.
For prices and availability, request a quote from AMES Srl: we will reply with our quotation, delivery times and, where needed, an equivalent technical alternative.
Quantity
Specifications 4
| Lead | Graphite, 2.8x120 mm |
|---|---|
| Marking depth (mm) | Up to 45 |
| Equipment supplied | Built-in sharpener, removable handle |
| Spare parts | Pack of 6 graphite leads |
The perfect setup for this job
Everything you need in one place, from functionality to safety.
For the job
A.M.E.S. srlTape measures 'NEW Popular'
Measure lengths and distances on site and in the workshop with a retractable tape.
MetricaTape measure, strong magnet MetricaCode 38597
Measure lengths, spans and distances to cut and lay to the correct dimensions.
A.M.E.S. srlAluminium Measuring Rod art. 533
Measure and mark lengths with a rigid rule that stays straight on the workpiece.