Carry water for irrigating, washing and supplying machines in the garden and on site.

Engine-driven pumps for clean water Genmac
Key features
- Typemotor pump for clean water
- Motor4-stroke petrol
- Connection1", 1.5", 2", 3" (plus 2" high-head model)
- Flow rate (l/min)da 133 a 1000
- Usegardening, irrigation, emptying pools and cellars
What it is
Engine-driven pumps for clean water Genmac. Key specifications: type motor pump for clean water, motor 4-stroke petrol, connection 1", 1.5", 2", 3" (plus 2" high-head model).
A clean water pump is a surface or submersible electric pump that lifts or pressurises clear water from wells, cisterns and tanks.
What it is for
Used in irrigation systems, from the water supply point to the emitter and for pumping water out of excavations, tanks and sumps.
How to use it
Install surface pumps on a level base close to the draw-off point, with a foot valve on the suction pipe, and fill them with water before first start-up; lower submersible pumps suspended on a rope. Use them only with clean, sand-free water and never let them run dry. Connect them to a circuit protected by an RCD and, in winter, drain outdoor pumps to protect them from frost.
Where it is used
- Agriculture
- Building services
- Water engineering works
Technical data
- Type: motor pump for clean water
- Motor: 4-stroke petrol
- Connection: 1", 1.5", 2", 3" (plus 2" high-head model)
- Flow rate (l/min): da 133 a 1000
- Use: gardening, irrigation, emptying pools and cellars
Who it is for
Designed for plumbers, agricultural workers and heating and plumbing engineers.
Related products
- Booster pump BP 3.200 Home Kärcher
- Self-priming engine-driven pump MP 3000 Efco
- Aquapop extendable hose — from the category Water Hoses and Layflat Hoses
- Reducing sockets FF art. 240 — from the category Galvanised Pipe Fittings
- Container for drum storage on grating Sall — from the category Tanks, Cisterns and Drums for Liquid Storage
- Browse the whole category: Clean Water Pumps
Before you order
In your request, please state the rated load or flow rate, the connection type and the quantities required, so we can give you the right quotation first time.
For prices and availability, request a quote from AMES Srl: we will reply with our quotation, delivery times and, where needed, an equivalent technical alternative.
Specifications 5
| Type | motor pump for clean water |
|---|---|
| Motor | 4-stroke petrol |
| Connection | 1", 1.5", 2", 3" (plus 2" high-head model) |
| Flow rate (l/min) | da 133 a 1000 |
| Use | gardening, irrigation, emptying pools and cellars |
The perfect setup for this job
Everything you need in one place, from functionality to safety.
For the job
Clamp hoses, sleeves and cables to secure them to fittings and supports.
Carry, decant and dispense fuels and technical fluids without spillage.
Lubricate two-stroke engines, chains, compressors and hydraulic systems, reducing wear.




