Allow climbing, descending and locking off along the rope, protecting against falls from height.

Anchor NAJA, Petzl
Key features
- RegulationsEN 795
- MaterialAluminium, stainless steel, polyamide, polyester
- Weight (g)400
- Rope diameter (min) (mm)11
- Rope diameter (max) (mm)13
- Pulley diameter (mm)18
What it is
NAJA (code G004AA00) is a Petzl anchor device, compliant with EN 795. It is intended for professional use in work at height, rope access and rescue, in accordance with the manufacturer's instructions.
A fall protection anchor is the fixed point, permanent or mobile, to which the worker's fall arrest or rope access system is connected.
What it is for
Used as an anchor point in fall protection systems, in forestry work and for work at height, where access and restraint must be ensured for the whole job.
How to use it
Choose the type according to the substrate (concrete, rock, steel, beam, vehicle) and install it following the manufacturer's instructions, using the specified fixings. Check its condition before use and connect with a connector, preferably above the worker's head. Take into account the fall clearance below the work position; an anchor that has arrested a fall must be taken out of service.
Where it is used
- Urban green space maintenance
- Forest management
- Professional landscaping and gardening
Technical data
- Regulations: EN 795
- Material: Aluminium, stainless steel, polyamide, polyester
- Weight (g): 400
- Rope diameter (min) (mm): 11
- Rope diameter (max) (mm): 13
- Pulley diameter (mm): 18
- Pulley type: Sealed ball bearing
- Efficiency: 91%
- Breaking load (kN): 25
- Maximum authorised load (kg): 250
- Warranty: 3 years
- Technical note: Technical-notice-NAJA-1 (6.01 MB)
Who it is for
Designed for forestry workers and arborists.
Related products
- Structural Anchor Coeur Steel, Petzl
- Stainless Anchor Collinox, Petzl
- Work seat for suspended work VOLT Petzl — from the category Fall Arrest Harnesses
- OPEN spacer Petzl — from the category Safety Karabiners
- Replacement reinforced rope for MICROFLIP Petzl — from the category Lanyards and Energy Absorbers
- Browse the whole category: Anchors
Before you order
In your request, please state the diameter and the quantities required, so we can give you the right quotation first time.
For prices and availability, request a quote from AMES Srl: we will reply with our quotation, delivery times and, where needed, an equivalent technical alternative.
Specifications 13
| Item code | G004AA00 |
|---|---|
| Regulations | EN 795 |
| Material | Aluminium, stainless steel, polyamide, polyester |
| Weight (g) | 400 |
| Rope diameter (min) (mm) | 11 |
| Rope diameter (max) (mm) | 13 |
| Pulley diameter (mm) | 18 |
| Pulley type | Sealed ball bearing |
| Efficiency | 91% |
| Breaking load (kN) | 25 |
| Maximum authorised load (kg) | 250 |
| Warranty | 3 years |
| Technical note | Technical-notice-NAJA-1 (6.01 MB) |
The perfect setup for this job
Everything you need in one place, from functionality to safety.
For the job
Tie, pull and secure loads, materials and equipment during work.
Connect harnesses, lanyards and anchors to protect against falls when working at height.
For safety
Protect against falls from height by supporting the body during work at height.




