SolaDigital level Red 60 Digital Sola
Check whether surfaces, lines and components are level, plumb or sloping.
All Progress Profiles products
Cross spacer Prorail Spacers Progress Profiles
Key features
- MaterialPolypropylene (spacer cross with removable fins)
- TypeInstallation products and accessories
What it is
Cross spacer Prorail Spacers Progress Profiles. Key specifications: material Polypropylene (spacer cross with removable fins), type Installation products and accessories.
Tile and slab spacers are cross spacers, wedges, levelling systems and pedestals that keep joints even and surfaces aligned during laying.
What it is for
Used for laying large-format slabs, where handling and flatness are the challenge and for laying tiles and slabs, from spreading the adhesive to grouting.
How to use it
Insert cross spacers and spacers between the tiles in the fresh adhesive to keep the joint width constant, and remove them before grouting. Place levelling clips under the slab edges and tighten them with a wedge or pliers until the slabs are aligned, then snap them off once the adhesive has set. Adjust raised floor pedestals by screwing the head up or down to the required level.
Where it is used
- Residential construction
- Renovation
Technical data
- Material: Polypropylene (spacer cross with removable fins)
- Type: Installation products and accessories
Who it is for
Designed for tilers and floor layers.
Standards and safety
UNI EN ISO 9001:2015 (company certification of Progress Profiles S.p.A.)
Related products
- Perforated cross and half-cross tile spacer Progress Profiles
- Noise-reducing anti-slip disc for Prosupport Slim Ø 150 mm thickness 1.5 mm Progress Profiles
- Pulling pliers for Proleveling Wedge system Progress Profiles — from the category Tile Laying and Grouting Tools
- Ring Prorail Ring Progress Profiles — from the category Installation Products and Accessories
- Spare part for manual tile cutter TI Rubi — from the category Tile Cutting, Finishing and Shaping Tools
- Browse the whole category: Spacers for Floor Slabs and Tiles
Before you order
Tell us the quantities you need and the intended use: if there is a more suitable version, or an equivalent available sooner, we will let you know.
For prices and availability, request a quote from AMES Srl: we will reply with our quotation, delivery times and, where needed, an equivalent technical alternative.
Quantity
Specifications 2
| Material | Polypropylene (spacer cross with removable fins) |
|---|---|
| Type | Installation products and accessories |
The perfect setup for this job
Everything you need in one place, from functionality to safety.
For the job
Progress ProfilesPerimeter profile for raised floors Prosupport Profile N ...Code profile-n
Finish and protect edges, steps, joints and the junction between wall and floor.
RaimondiTile and slab cutting system RAIZOR MTC RaimondiCode RAIZOR-MTC-SISTEMA-DI-TAGLIO-PER-PIASTRELLE-E-LAST
Cut, drill, bevel and polish tiles and slabs during laying.
For safety
VigorTiler's knee pads, PP shell, VigorCode 54281-20
Protect knees from pain and crushing when working kneeling on the ground.