Clamp hoses, sleeves and cables to secure them to fittings and supports.

High-pressure reducer with safety valve
Key features
- Capacity (kg/h)12/14
- Calibration pressure (bar)0–4, variable
- Equipment suppliedshut-off valve
What it is
High-pressure reducer with safety valve. Key specifications: capacity (kg/h) 12/14, calibration pressure (bar) 0–4, variable, equipment supplied shut-off valve.
Gas regulators are pressure regulators, valves, hoses and fittings that connect gas cylinders or the gas mains to appliances, reducing the pressure to the working value.
What it is for
Used for installing building services and plant.
How to use it
Choose the regulator suited to the gas, LPG or natural gas, and to the appliance's flow rate, screw it onto the cylinder or line with an undamaged washer and secure the hose with hose clips. After fitting, check for leaks with soapy water, never with a flame. Replace hoses and regulators by the date printed on them; only a qualified installer may work on fixed installations.
Where it is used
- Building services
- Industrial plant engineering
Technical data
- Capacity (kg/h): 12/14
- Calibration pressure (bar): 0–4, variable
- Equipment supplied: shut-off valve
Who it is for
Designed for plumbers and heating and plumbing engineers.
Related products
- Angle gas valve M/F
- Adjustable pressure regulators
- Fixing clips — from the category Hose Clamps
- Carbon monoxide and smoke detector — from the category Gas Detectors
- Replacement gaskets — from the category Sealing Fittings
- Browse the whole category: Gas Regulators
Before you order
In your request, please state the rated load or flow rate and the quantities required, so we can give you the right quotation first time.
For prices and availability, request a quote from AMES Srl: we will reply with our quotation, delivery times and, where needed, an equivalent technical alternative.
Specifications 4
| Item code | 765.250.44000 |
|---|---|
| Capacity (kg/h) | 12/14 |
| Calibration pressure (bar) | 0–4, variable |
| Equipment supplied | shut-off valve |
The perfect setup for this job
Everything you need in one place, from functionality to safety.
For the job
Measure oxygen and toxic or flammable gases and raise the alarm before the air becomes dangerous.
Heat and dry building sites, industrial units and buildings under construction even in the cold months.
Solder, braze and heat small parts with a hot tip or flame.




