Skip to content
0 Quotes 0Compare
All A.M.E.S. srl products

Strip sealant

Key features

  • Strip length (cm)60
  • Width (mm)10
  • Thickness (mm)3

What it is

Strip sealant. Key specifications: strip length (cm) 60, width (mm) 10, thickness (mm) 3.

Sealant is a paste product, in cartridges or tubes, that fills and seals joints and gaps, either remaining elastic or curing hard (silicones, polyurethanes, acrylics, hybrids, construction adhesives).

What it is for

Used for sealing joints, gaps and service penetrations.

How to use it

Clean and dry the joint edges, insert backer rod if needed and mask the edges with masking tape. Cut the nozzle at an angle to the width of the joint, extrude the product with the gun in a continuous bead and tool it with a wet spatula before it skins over. Remove the tape immediately and allow the full curing time before stressing the joint.

Where it is used

  • Residential construction
  • Building maintenance
  • Renovation

Technical data

  • Strip length (cm): 60
  • Width (mm): 10
  • Thickness (mm): 3

Who it is for

Designed for waterproofing specialists, building maintenance operatives and glaziers.

Related products

Before you order

In your request, please state the length and the quantities required, so we can give you the right quotation first time.

For prices and availability, request a quote from AMES Srl: we will reply with our quotation, delivery times and, where needed, an equivalent technical alternative.

Quantity
Specifications 4
Item code682.050.50300
Strip length (cm)60
Width (mm)10
Thickness (mm)3

The perfect setup for this job

Everything you need in one place, from functionality to safety.

For the job

A.M.E.S. srlSilicone gun Evolution

Dispense and mix adhesives, sealants, foams and chemical anchors in the right dose and at the right point.

tesaStretch paper tape, art. 4323

Mask edges and surfaces during painting and sealing and remove cleanly without leaving residue.

A.M.E.S. srlMaxi trowel

Spread, skim and smooth fillers, adhesives and mortars and scrape off the residue.

For safety