Joint sealants SiMP-Seal 20 NPT Sigill

What it is

is a one-component, low-modulus, non-sagging SiMP – Silyl Modified Polymer sealant for construction. It cures under the influence of atmospheric moisture to form a high-performance compound with permanent elasticity and high resistance to ageing and weathering. Free of solvents and isocyanates. Application areas: it is a versatile, high-performance building sealant for expansion and construction joints in vertical applications, joints in prefabricated elements, external walls and cladding joints. Suitable for sealing metal roofs and gutters, bridge and balcony parapets, and for waterproofing joints between bricks, blocks, masonry, wood, concrete, metal and window and door frames.

Sealant is a paste product, in cartridges or tubes, that fills and seals joints and gaps, either remaining elastic or curing hard (silicones, polyurethanes, acrylics, hybrids, construction adhesives).

What it is for

Used for waterproofing roofs, terraces and below-ground structures, for structural and assembly bonding and for sealing joints, gaps and service penetrations.

How to use it

Clean and dry the joint edges, insert backer rod if needed and mask the edges with masking tape. Cut the nozzle at an angle to the width of the joint, extrude the product with the gun in a continuous bead and tool it with a wet spatula before it skins over. Remove the tape immediately and allow the full curing time before stressing the joint.

Where it is used

• Residential construction
• Building maintenance
• Renovation

Technical data

• Type: Single-component low-modulus construction sealant
• Base: SiMP (Silyl Modified Polymer), moisture-curing
• Colour: white, black, grey
• Shore A hardness: 18
• Specific weight (g/cm³): 1,50
• Open time (min): 100
• Elastic modulus at 100% (N/mm²): 0,4
• Tensile strength (N/mm²): 1,0
• Elongation at break (%): 500
• Joint movement capacity: ±25% of the joint width
• Application temperature (°C): +5 / +40
• Pack: 290 ml PE cartridges (12 pcs/box); 600 ml foil packs (20 pcs/box)
• Standard: EN 15651-1 type F INT/EXT CC; ISEGA (CE 1935/2004)

Who it is for

Designed for formwork carpenters, plumbers, waterproofing specialists and building maintenance operatives.

Standards and safety

EN 15651 EN 15 651 ISO 11600 ISO 37 LEED iEQc 4.1 CARB VOC SCAQMD 1168 BAAQMD Reg 8 Rule 51 CARB VOC regulation 1 Technical data sheet SiMP BAAQMD Reg 8 Rule 51 CARB VOC regulation FIELDS OF APPLICATION SiMP DIN 53505 DIN 53504 ISEGA

Product code: SIMPSEAL20

Related products

• Joint sealants U-Seal 907 NPT Sigill
• Green sealant for worktops NPT Sigill
• Foam gun NPT Sigill — from the category Adhesive and Sealant Application Systems
• Sensitive paper tape NPT Sigill — from the category Paper Masking Tapes
• Polyurethane foam Polipur 704 NPT Sigill — from the category Polyurethane (PU) Foams for Filling and Sealing
• Browse the whole category: Professional Acrylic, PU, MS Polymer and Bituminous Sealants

Before you order

In your request, please state the colour and the quantities required, so we can give you the right quotation first time.

For prices and availability, request a quote from AMES Srl: we will reply with our quotation, delivery times and, where needed, an equivalent technical alternative.