Carry water for irrigating, washing and supplying machines in the garden and on site.

Multistage submersible pump for wells SP 90 Wortex
Key features
- Engine typeMotor submerged in a water bath
- InsulationClass B
- ProtectionIP68
- ServiceContinuous
- Motor outer casingStainless steel AISI 304
- Drive shaftStainless steel AISI 304
What it is
Multistage submersible pump for wells SP 90 Wortex. Key specifications: engine type Motor submerged in a water bath, insulation Class B, protection IP68.
A clean water pump is a surface or submersible electric pump that lifts or pressurises clear water from wells, cisterns and tanks.
What it is for
Used for pumping water out of excavations, tanks and sumps.
How to use it
Install surface pumps on a level base close to the draw-off point, with a foot valve on the suction pipe, and fill them with water before first start-up; lower submersible pumps suspended on a rope. Use them only with clean, sand-free water and never let them run dry. Connect them to a circuit protected by an RCD and, in winter, drain outdoor pumps to protect them from frost.
Where it is used
- Agriculture
- Water engineering works
Technical data
- Engine type: Motor submerged in a water bath
- Insulation: Class B
- Protection: IP68
- Service: Continuous
- Motor outer casing: Stainless steel AISI 304
- Drive shaft: Stainless steel AISI 304
- Upper support: Cast iron
- Lower support: Cast iron
- Mechanical seal: Ceramic/graphite
- Pump outer casing: Stainless steel AISI 304
- Pump shaft: Stainless steel AISI 304
- Stages and impellers: Stainless steel AISI 304
- Ports, all models: 2″ 1/2
- Well diameter: 6" (DN 150 mm)
Who it is for
Designed for plumbers and agricultural workers.
Related products
- Submersible multistage motor JNB Wortex
- Submersible multistage motor HP-T 6" Wortex
- Low-density PE pipe PN6 — from the category Water Hoses and Layflat Hoses
- Reducing sockets FF art. 240 — from the category Galvanised Pipe Fittings
- Tank with electric pump for diesel transfer DCC 100 Wortex — from the category Tanks, Cisterns and Drums for Liquid Storage
- Browse the whole category: Clean Water Pumps
Before you order
In your request, please state the diameter and the quantities required, so we can give you the right quotation first time.
For prices and availability, request a quote from AMES Srl: we will reply with our quotation, delivery times and, where needed, an equivalent technical alternative.
Specifications 15
| Engine type | Motor submerged in a water bath |
|---|---|
| Insulation | Class B |
| Protection | IP68 |
| Service | Continuous |
| Motor outer casing | Stainless steel AISI 304 |
| Drive shaft | Stainless steel AISI 304 |
| Upper support | Cast iron |
| Lower support | Cast iron |
| Mechanical seal | Ceramic/graphite |
| Pump outer casing | Stainless steel AISI 304 |
| Pump shaft | Stainless steel AISI 304 |
| Stages and impellers | Stainless steel AISI 304 |
| Ports, all models | 2″ 1/2 |
| Well diameter | 6" (DN 150 mm) |
| Regulations and certifications | Not explicitly listed |
The perfect setup for this job
Everything you need in one place, from functionality to safety.
For the job
Connect and fit out pumps, tanks and cisterns so that the water system works.
Join pipes and components of water systems with threaded joints and reducers.
Distribute power on site and protect people and tools from overloads and earth leakage.




