A.M.E.S. srlNon-toxic coiled hose
Carry water for irrigating, washing and supplying machines in the garden and on site.
All Wortex products
Submersible electric pumps SVS-VA Wortex
Key features
- Maximum liquid temperature35°C
- Max immersion depth (m)5
- Solids passageØ 35 mm (SVS 750-VA); Ø 50 mm (other models)
- Minimum suction level (mm)120
- ServiceContinuous
- Mechanical sealOil bath (silicon/silicon/NBR)
What it is
Submersible electric pumps SVS-VA Wortex. Key specifications: maximum liquid temperature 35°C, max immersion depth (m) 5, solids passage Ø 35 mm (SVS 750-VA); Ø 50 mm (other models).
A submersible sewage and dirty water pump is a pump that is immersed to draw up and discharge dirty water with suspended solids, light sludge and wastewater.
What it is for
Used for water drainage and for pumping water out of excavations, tanks and sumps.
How to use it
Lower it into the sump or excavation hanging from its handle on a rope or chain, never by the cable, and stand it on a firm base, raised above the sludge. Connect the delivery pipe without kinks and check that the float can move freely. Never run it dry; after pumping dirty water, run it in clean water and check the impeller.
Where it is used
- Water engineering works
- Civil protection
Technical data
- Maximum liquid temperature: 35°C
- Max immersion depth (m): 5
- Solids passage: Ø 35 mm (SVS 750-VA); Ø 50 mm (other models)
- Minimum suction level (mm): 120
- Service: Continuous
- Mechanical seal: Oil bath (silicon/silicon/NBR)
- Capacitor: Permanently fitted
- Power supply: Single-phase 230V-50Hz automatic with float switch; three-phase 400V-50Hz manual
- Insulation: Class F
- Protection: IP68
- Handle: Stainless steel AISI 304 + Nylon
- Motor case: Stainless steel AISI 304
- Pump body: Stainless steel AISI 304
- Impeller: Stainless steel AISI 304
Who it is for
Designed for plumbers.
Related products
- Submersible electric pump VORT Wortex
- Submersible electric pump VORT 200/300 Wortex
- Drinky Flex hose — from the category Water Hoses and Layflat Hoses
- Rectangular inspection chamber — from the category Inspection Chambers
- Galvanised 2-eye turnbuckles — from the category Chains and Accessories
- Browse the whole category: Submersible Wastewater Pumps
Before you order
Tell us the quantities you need and the intended use: if there is a more suitable version, or an equivalent available sooner, we will let you know.
For prices and availability, request a quote from AMES Srl: we will reply with our quotation, delivery times and, where needed, an equivalent technical alternative.
Quantity
Specifications 17
| Maximum liquid temperature | 35°C |
|---|---|
| Max immersion depth (m) | 5 |
| Solids passage | Ø 35 mm (SVS 750-VA); Ø 50 mm (other models) |
| Minimum suction level (mm) | 120 |
| Service | Continuous |
| Mechanical seal | Oil bath (silicon/silicon/NBR) |
| Capacitor | Permanently fitted |
| Power supply | Single-phase 230V-50Hz automatic with float switch; three-phase 400V-50Hz manual |
| Insulation | Class F |
| Protection | IP68 |
| Handle | Stainless steel AISI 304 + Nylon |
| Motor case | Stainless steel AISI 304 |
| Pump body | Stainless steel AISI 304 |
| Impeller | Stainless steel AISI 304 |
| Suction flange | Stainless steel AISI 304 |
| Drive shaft | Stainless steel AISI 304 |
| Regulations and certifications | EN 60335-2-41 |
The perfect setup for this job
Everything you need in one place, from functionality to safety.
For the job
UnifixHose clamp 12 mm band and W4 stainless steel screw UnifixCode 0535-216-25-01
Clamp hoses, sleeves and cables to secure them to fittings and supports.
A.M.E.S. srlReducing galvanised steel socket F/F
Join pipes and components of water systems with threaded joints and reducers.
FriggeriCable reel 30 m 3x2.5 mm² with 2 CEE 2P+T 16A sockets and...Code AV-0020230G25/44
Bring power to site tools through protected connections, including outdoors.