All A.M.E.S. srl products
Bolt cutters art. 596A
Key features
- Bladesforged and quenched-and-tempered tool steel
- HandleLacquered steel pipe with plastic handles
- Max material hardness (N/mm²)1560
- Length (mm)900
- Cutting capacity (mm)16 (750 N/mm² material)
- Spare partsblades for models 350, 450 and 900
What it is
Bolt cutters art. 596A. Key specifications: blades forged and quenched-and-tempered tool steel, handle Lacquered steel pipe with plastic handles, max material hardness (N/mm²) 1560.
A bolt cutter is a large lever-action cutter that cuts bolts, rods, chains and padlocks with little effort thanks to its long handles.
What it is for
Used for cutting metal sections, sheet and tube.
How to use it
Check that the diameter and hardness of the material are within the stated capacity. Place the workpiece as close as possible to the jaw pivot and close the handles in one continuous movement, without levering sideways. Wear safety glasses, as the cut piece can fly off. If the jaws chip, replace them or adjust them with the adjusting screw.
Where it is used
- Industrial construction
Technical data
- Blades: forged and quenched-and-tempered tool steel
- Handle: Lacquered steel pipe with plastic handles
- Max material hardness (N/mm²): 1560
- Length (mm): 900
- Cutting capacity (mm): 16 (750 N/mm² material)
- Spare parts: blades for models 350, 450 and 900
Who it is for
Designed for metal fabricators and steel fixers.
Related products
- Bolt cutters HMBC0808
- Angled bolt cutters
- Ultra-lightweight safety glasses Portwest PS35 — from the category Safety Glasses, Goggles and Face Shields
- Operator Gloves Rubi — from the category General-Purpose Safety Gloves
- Connecting latches — from the category Chains and Accessories
- Browse the whole category: Bolt Cutters
Before you order
In your request, please state the length and the quantities required, so we can give you the right quotation first time.
For prices and availability, request a quote from AMES Srl: we will reply with our quotation, delivery times and, where needed, an equivalent technical alternative.
Quantity
Specifications 6
| Blades | forged and quenched-and-tempered tool steel |
|---|---|
| Handle | Lacquered steel pipe with plastic handles |
| Max material hardness (N/mm²) | 1560 |
| Length (mm) | 900 |
| Cutting capacity (mm) | 16 (750 N/mm² material) |
| Spare parts | blades for models 350, 450 and 900 |
The perfect setup for this job
Everything you need in one place, from functionality to safety.
For the job
A.M.E.S. srlHalf-round files, bastard cut
Remove stock from and finish metal and wood by hand, taking off burrs and shaping edges.
For safety
A.M.E.S. srlDisposable gloves in blue nitrile size S, pack of 100 pcs
Protect hands from abrasion, dirt, liquids and minor cuts while keeping a firm grip.
A.M.E.S. srlSafety glasses ET 81 BS
Protect eyes and face from fragments, dust, splashes and impacts.