FischerPolyurethane foam gun PUP M3 with 2 extensions FischerCode 4006209332085
Dispense and mix adhesives, sealants, foams and chemical anchors in the right dose and at the right point.
All Kimia products
Single-component paintable polyurethane joint sealant Tecnoseal 130 Kimia
Key features
- ModelTecnoseal 130
- RegulationsEN 15651-1 EN 15651-4
- Made in Italy100% Italian production
What it is
Single-component paintable polyurethane joint sealant Tecnoseal 130 Kimia. Key specifications: model Tecnoseal 130, regulations EN 15651-1 EN 15651-4, made in Italy 100% Italian production.
Sealant is a paste product, in cartridges or tubes, that fills and seals joints and gaps, either remaining elastic or curing hard (silicones, polyurethanes, acrylics, hybrids, construction adhesives).
What it is for
Used for waterproofing roofs, terraces and below-ground structures, for structural and assembly bonding and for sealing joints, gaps and service penetrations.
How to use it
Clean and dry the joint edges, insert backer rod if needed and mask the edges with masking tape. Cut the nozzle at an angle to the width of the joint, extrude the product with the gun in a continuous bead and tool it with a wet spatula before it skins over. Remove the tape immediately and allow the full curing time before stressing the joint.
Where it is used
- Residential construction
- Building maintenance
- Renovation
Technical data
- Model: Tecnoseal 130
- Regulations: EN 15651-1 EN 15651-4
- Made in Italy: 100% Italian production
Who it is for
Designed for waterproofing specialists, building maintenance operatives and bricklayers.
Related products
- Two-component self-levelling polyurethane joint sealant Tecnoseal 88 Kimia
- Single-component acrylic joint sealant Tecnoseal ACR Kimia
- Manual blower pump for cleaning chemical anchor holes Bossong — from the category Adhesive and Sealant Application Systems
- Washi paper tape, blue — from the category Paper Masking Tapes
- Polyurethane foam — from the category Polyurethane (PU) Foams for Filling and Sealing
- Browse the whole category: Professional Acrylic, PU, MS Polymer and Bituminous Sealants
Before you order
Tell us the quantities you need and the intended use: if there is a more suitable version, or an equivalent available sooner, we will let you know.
For prices and availability, request a quote from AMES Srl: we will reply with our quotation, delivery times and, where needed, an equivalent technical alternative.
Quantity
Specifications 3
| Model | Tecnoseal 130 |
|---|---|
| Regulations | EN 15651-1 EN 15651-4 |
| Made in Italy | 100% Italian production |
The perfect setup for this job
Everything you need in one place, from functionality to safety.
For the job
PanfilmMasking tape 635 General Mask PanfilmCode 635-general-mask
Mask edges and surfaces during painting and sealing and remove cleanly without leaving residue.
MetricaUtility knife "All Black" with locking screw (ABS body) M...
Cut cardboard, tapes, membranes and carpet with the retractable blade.
CarverPaint scraper 27cm Carver
Spread, skim and smooth fillers, adhesives and mortars and scrape off the residue.
For safety
NeriPolyurethane glove Ultrane 550 Mapa Neri 349051Code 349051
Protect hands from abrasion, dirt, liquids and minor cuts while keeping a firm grip.