Dispense and mix adhesives, sealants, foams and chemical anchors in the right dose and at the right point.

Adhesive Gecko Speed, Unifix
Key features
- TypeOne-component flexible moisture-curing adhesive with instant initial tack
- ColourWhite
- Content (ml)310
- Ready to assemble (min)20
- FeaturesFree from solvents, silicone, halogens and isocyanates
What it is
Adhesive Gecko Speed, Unifix. Key specifications: type One-component flexible moisture-curing adhesive with instant initial tack, colour White, content (ml) 310.
Sealant is a paste product, in cartridges or tubes, that fills and seals joints and gaps, either remaining elastic or curing hard (silicones, polyurethanes, acrylics, hybrids, construction adhesives).
What it is for
Used for waterproofing roofs, terraces and below-ground structures, for structural and assembly bonding and for sealing joints, gaps and service penetrations.
How to use it
Clean and dry the joint edges, insert backer rod if needed and mask the edges with masking tape. Cut the nozzle at an angle to the width of the joint, extrude the product with the gun in a continuous bead and tool it with a wet spatula before it skins over. Remove the tape immediately and allow the full curing time before stressing the joint.
Where it is used
- Residential construction
- Building maintenance
- Renovation
Technical data
- Type: One-component flexible moisture-curing adhesive with instant initial tack
- Colour: White
- Content (ml): 310
- Ready to assemble (min): 20
- Features: Free from solvents, silicone, halogens and isocyanates
Who it is for
Designed for formwork carpenters, plumbers, waterproofing specialists and building maintenance operatives.
Related products
- Adhesive Gecko clear, Unifix
- Adhesive Gecko POP Hybrid, Unifix
- Mixer nozzle for Maxbond, Maxbond Speed and Maxbond PEPP Unifix — from the category Adhesive and Sealant Application Systems
- Paper tape — from the category Paper Masking Tapes
- Construction adhesive foam E-GLUE for gun Unifix — from the category Polyurethane (PU) Foams for Filling and Sealing
- Browse the whole category: Professional Acrylic, PU, MS Polymer and Bituminous Sealants
Before you order
In your request, please state the colour and the quantities required, so we can give you the right quotation first time.
For prices and availability, request a quote from AMES Srl: we will reply with our quotation, delivery times and, where needed, an equivalent technical alternative.
Specifications 5
| Type | One-component flexible moisture-curing adhesive with instant initial tack |
|---|---|
| Colour | White |
| Content (ml) | 310 |
| Ready to assemble (min) | 20 |
| Features | Free from solvents, silicone, halogens and isocyanates |
The perfect setup for this job
Everything you need in one place, from functionality to safety.
For the job
Mask edges and surfaces during painting and sealing and remove cleanly without leaving residue.
Cut cardboard, tapes, membranes and carpet with the retractable blade.
Spread, skim and smooth fillers, adhesives and mortars and scrape off the residue.
For safety
Protect hands from abrasion, dirt, liquids and minor cuts while keeping a firm grip.





