Pump out and transfer dirty water containing light sludge, suspended solids and wastewater.

Tray for constructed wetland with horizontal subsurface flow VS5 Rototec
Key features
- Usable areaCirca 5 m²
- LengthDa 2160 a 2450 mm
- WidthDa 1810 a 2100 mm
- Height765 mm
- Inlet/outlet pipingPVC DE 125
- TrayMonoblocco in polietilene lineare senza saldature
What it is
One-piece polyethylene tray of about 5 m² for horizontal subsurface flow constructed wetland systems. Filled with layers of gravel, soil and marsh plants, it treats domestic and similar wastewater, keeping the water level a few centimetres below the surface. It is used downstream of pre-treatment for homes, farm stays, campsites and small communities.
Wastewater treatment systems are tanks, treatment units, pumping stations and components such as blowers, diffusers, control panels and covers for treating and pumping wastewater.
What it is for
Used for filtering system water, in the installation and maintenance of plumbing systems and for pipe laying.
How to use it
Bury the tanks on a level bedding layer, connect inlet and outlet at the correct falls and backfill while gradually filling them with water to balance the soil pressure. Have blowers, pumps and control panels connected by an electrician and keep them protected from water. Inspect the system through the covers, clean the diffusers and have the sludge emptied regularly.
Where it is used
- Residential construction
- Building services
- Water engineering works
Technical data
- Usable area: Approx. 5 m²
- Length: Da 2160 a 2450 mm
- Width: Da 1810 a 2100 mm
- Height: 765 mm
- Inlet/outlet piping: PVC OD 125
- Tray: Seamless monobloc in linear polyethylene
- Filling: Coarse gravel 15 cm, gravel 15 cm, non-woven fabric, soil and peat with marsh plants
- Standards: Italian Legislative Decree 152/2006, Emilia-Romagna Regional Resolution (DGR) 1053/2003
Who it is for
Designed for gardeners, plumbers and building contractors.
Related products
- Pumped attenuation tanks Rototec
- Gravity attenuation tanks Rototec
- Round inspection chamber with tap — from the category Inspection Chambers
- Submersible pump VORT Wortex — from the category Submersible Wastewater Pumps
- Site socket distribution board Friggeri PS-DS101010014/35SP — from the category Distribution Boards and Protection Devices
- Browse the whole category: Water Purification
Before you order
In your request, please state the length and the quantities required, so we can give you the right quotation first time.
For prices and availability, request a quote from AMES Srl: we will reply with our quotation, delivery times and, where needed, an equivalent technical alternative.
Specifications 9
| Item code | VS5 |
|---|---|
| Usable area | Circa 5 m² |
| Length | Da 2160 a 2450 mm |
| Width | Da 1810 a 2100 mm |
| Height | 765 mm |
| Inlet/outlet piping | PVC DE 125 |
| Tray | Monoblocco in polietilene lineare senza saldature |
| Filling | Ghiaione 15 cm, ghiaia 15 cm, tessuto non tessuto, terriccio e torba con piante palustri |
| Standards | D.Lgs 152/2006, DGR Emilia-Romagna 1053/2003 |
The perfect setup for this job
Everything you need in one place, from functionality to safety.
For the job
Pump out muddy water with sand and debris from excavations, sumps and flooded rooms.
Eliminate or mask bad odours from portable toilets, waste, drains and rooms.
Distribute power on site and protect people and tools from overloads and earth leakage.





