Concrete screw Tapcon 5 Xtrem Hfl SPIT

What it is

Concrete screw Tapcon 5 Xtrem Hfl SPIT. Key specifications: diameters Ø6mm, Ø8mm, anchoring depth (hnom) (mm) 35 - 65, drilling depth (mm) 40 - 100.

A concrete screw is a screw anchor that is driven directly into the hole in concrete or masonry, cutting its own thread, without a plug.

What it is for

Used for anchoring shelves, brackets and structures to walls and for structural fixings, where the fixing is load-bearing and must be calculated.

How to use it

Drill with a bit of the diameter specified for the screw to the required depth and clean the hole thoroughly. Drive the screw through the part being fixed with a spanner or impact driver until it is seated, without overtightening. Observe the edge distances and hole spacings stated in the technical data sheet.

Where it is used

• Industrial construction
• Residential construction

Technical data

• Diameters: Ø6mm, Ø8mm
• Anchoring depth (hnom) (mm): 35 - 65
• Drilling depth (mm): 40 - 100
• Total anchor length (mm): 40 - 100
• Thread diameter: 6 mm, 8 mm
• Drilling hole diameter: 6 mm, 8 mm
• Maximum tightening torque (impact): 160-450 Nm (depending on diameter/depth)
• Minimum concrete thickness (mm): 80 - 115
• Characteristic centre distance (Scr) (mm): 81 - 156
• Minimum centre distance (Smin) (mm): 35 - 50
• Maximum thickness of the piece to fix (mm): 5 - 65
• Characteristic bending moment: Ø6: 22,9 Nm; Ø8: 54,2 Nm
• Recommended bending moment: Ø6: 11,0 Nm; Ø8: 26,1 Nm

Who it is for

Designed for electricians, metal fabricators and plumbers.

Related products

• Concrete screw Tapcon Rod SPIT
• Concrete screw Tapcon 5 Xtrem Dome SPIT
• SDS-Plus bit XT 3 for concrete SPIT 88762 — from the category Drill Bits for Granite, Masonry and Concrete
• Impact driver 18V Li-ion 2.0Ah (FMC645D2) (FMC645D2) Stanley — from the category Impact Drivers (Hex Drive)
• Reducing adapter for impact sockets 1/2" - 3/8" Milwaukee 4932480354 — from the category Impact Sockets
• Browse the whole category: Concrete Screws (Screw Anchors)

Before you order

In your request, please state the length, the diameter and the quantities required, so we can give you the right quotation first time.

For prices and availability, request a quote from AMES Srl: we will reply with our quotation, delivery times and, where needed, an equivalent technical alternative.