Pure zinc Fervi

What it is

Pure zinc Fervi. Key specifications: type Spray can, capacity (ml) 400, gross weight (kg) 0,42.

Paints for iron and metal are zinc-rich coatings, enamels, micaceous iron oxide finishes and blackening agents that protect against rust and finish railings, structures and metal roofing.

What it is for

Used to protect surfaces during works, so they do not have to be redone afterwards and for coating wood, metal and masonry surfaces.

How to use it

Remove rust with a wire brush or abrasive paper and degrease the metal. Apply the primer or zinc-rich coating if required, then the finish by brush, roller or spray in thin coats. Apply blackening agents to bare metal and rinse as per the label. Protect from rain and humidity until dry.

Where it is used

• Mechanical engineering industry
• Building maintenance

Technical data

• Type: Spray can
• Capacity (ml): 400
• Gross weight (kg): 0,42
• Composition: cold galvanising compound based on synthetic resins
• Use: Touching up and repairing galvanised parts

Who it is for

Designed for metal fabricators, painters and decorators and construction painters.

Related products

• Anti-corrosion spray FTC-CP Fischer
• Light zinc Fervi
• Crimped wire circular brush Fervi SRF250/25 — from the category Crimped Wire Brushes
• Brush Tiziano, Series 235, Panfilm — from the category Paintbrushes
• Epox solvent Kimia — from the category Solvents and Thinners for Paints and Coatings
• Browse the whole category: Paints for Iron and Metal

Before you order

Tell us the quantities you need and the intended use: if there is a more suitable version, or an equivalent available sooner, we will let you know.

For prices and availability, request a quote from AMES Srl: we will reply with our quotation, delivery times and, where needed, an equivalent technical alternative.