Imer Group

The continuous-cycle plastering machine mixes and pumps premixed mortar or plaster through a hose to the wall, where it is applied. The continuous cycle allows more consistent work on large surfaces. The Koine 4 Evo, Hi-Flow and Koine Dual versions differ in functions and equipment. For quantities and configuration, request a quotation. Check the hourly output and the pump pressure in the data sheet.

The dumper carries material around the site, and the TAURUS 500 and TAURUS 700 models differ in size and load capacity. The MIX ALL mixer is used to mix mortar or concrete in small quantities. To choose, compare capacity, type of terrain and manoeuvring space. The payload and the capacity of the skip are given in the technical data sheet.

The vibratory roller compacts granular and asphalt materials, such as the sub-bases of roads, yards or road metalling. The vibration helps reduce the voids between particles and achieve a more stable surface. Weight and vibration frequency influence the result, and must be chosen according to the thickness to be compacted. Operators are exposed to the vibrations transmitted, so Italian Legislative Decree 81/2008 on workplace safety requires the risk to be assessed.

Lifting platforms are used to carry materials or equipment up to height during work. The IM code with the number identifies the model, while the AC code indicates a variant to be checked in the data sheet. The maximum load and working height are the figures to compare with the material to be lifted. Use them only for the load specified by the manufacturer, and do not carry people if the machine is not designed for it.

A batching plant measures out cement, aggregates and water and mixes them to produce concrete. The mobile model is transportable and useful for temporary sites, while the self-service one, such as the Oruself 500, is designed for independent use. The type of plant depends on the quantity produced and the continuity of the work. For configuration and capacity, request a quotation.

The Storm Plus system conveys dry premixed mortars through a hose using compressed air, to the point of use. It reduces manual handling and makes it possible to bring the material to upper floors or to areas that are difficult to reach. The distance and the route of the hose affect the output, so they must be assessed at the design stage. The system must be used with the specified protections and according to the manufacturer's instructions.

Every machine has a manual with instructions for use, maintenance and guards, which must stay fitted. Legislative Decree 81/2008 requires equipment to be used by trained personnel and checked periodically. Noise and vibration must be assessed, with suitable PPE (personal protective equipment). Do not remove the guards while the machine is running and keep moving parts clean. For work on fixed installations, follow lockout and safety procedures.