FerviBottle jack Fervi 0062/20Code 0062/20
Lift vehicles and heavy loads to work underneath or replace components.
All Breaker products
Hydraulic control unit, CI E 6, electric motor, Breaker
Also known as: hydraulic power pack, hydraulic power unit
Key features
- Pressure (bar)150
- MotorThree-phase electric 400 V
- Weight (kg)70
- Oil flow rate, l/min1x20
- Power (kW)5,5
What it is
The hydraulic power pack CI E 6 by Breaker is a sturdy, high-performance solution designed to power hydraulic equipment on site with maximum efficiency. Fitted with a 400 V three-phase electric motor, this power pack delivers an oil flow of 20 litres per minute and a pressure of 150 bar, ideal for applications that require constant power and precision. Its compact design and ring cooling system minimise maintenance, ensuring a long life even in intensive working conditions.
A hydraulic power pack is a portable engine-pump unit that supplies pressurised oil to drive hydraulic tools such as breakers, core drills, saws and pumps.
What it is for
Used for core drilling concrete and masonry, for service openings and sampling, for demolishing masonry and concrete structures and for cutting concrete and reinforced concrete.
How to use it
Set it on level ground, away from the edge of excavations, and outdoors or in a ventilated area if it has a combustion engine. Check the hydraulic oil and fuel levels, connect the hoses to the tool with clean quick couplers while the unit is stopped, then start it and set the flow rate required by the tool. At the end of the job, disconnect the hoses only after releasing the pressure, and cap the couplers.
Where it is used
- Road and motorway construction
- Demolition
- Civil engineering
Technical data
- Pressure (bar): 150
- Motor: Three-phase electric 400 V
- Weight (kg): 70
- Oil flow rate, l/min: 1x20
- Power (kW): 5,5
Who it is for
Designed for demolition operatives, building contractors and construction workers.
Related products
- Hydraulic control unit, CI13, Breaker
- Hydraulic control unit, CI E 11 twin, electric motor, Breaker
- SDS-Max demolition/chipping hammer, 1010 W, 8.5 J, 5 kg, FatMax (SFMEH220K-QS) Stanley — from the category Demolition Hammers
- Hydraulic core drill CI 15 Breaker — from the category Construction Machines for Cutting, Core Drilling and Compaction
- Hydraulic pump PI W3 Breaker — from the category Electric and Engine-Driven Pumps for Dirty Water and Wastewater
- Browse the whole category: Hydraulic Power Packs and Units
Before you order
In your request, please state the power rating, the rated load or flow rate and the quantities required, so we can give you the right quotation first time.
For prices and availability, request a quote from AMES Srl: we will reply with our quotation, delivery times and, where needed, an equivalent technical alternative.
Quantity
Specifications 5
| Pressure (bar) | 150 |
|---|---|
| Motor | Three-phase electric 400 V |
| Weight (kg) | 70 |
| Oil flow rate, l/min | 1x20 |
| Power (kW) | 5,5 |
The perfect setup for this job
Everything you need in one place, from functionality to safety.
For the job
BreakerPurification and lubrication oil Breaker
Lubricate two-stroke engines, chains, compressors and hydraulic systems, reducing wear.
DeWaltCordless demolition hammer Exe 28 mm 54V XR FlexVolt, bru...Code DCH966Z2-QW
Demolish concrete, masonry, plaster and floors using the hammering action of chisels alone.
BreakerCutting chisel, 22x82, L490, Breaker
Break, chase and scrape concrete, masonry and tiles when fitted to the demolition hammer.
For safety
NeriGlove 28 Neri 362040Code 362040
Protect hands from abrasion, dirt, liquids and minor cuts while keeping a firm grip.