Geared bench mill-drill Fervi T044/230V

What it is

The Fervi T044/230V is a gear-drive bench drilling and milling machine that brings the rigidity of pillar machines into a compact footprint suited to the workbench. It drills cast iron up to Ø 40 mm and S235JR steel up to Ø 32 mm with a pilot hole, mills up to Ø 80 mm with an insert cutter (Ø 32 mm with a cylindrical cutter) and taps up to M27 in cast iron and M24 in steel, with a Morse taper CM 4 connection and a B16 chuck from 1 to 13 mm. The 6 spindle speeds, from 75 to 1600 rpm with right and left rotation, and the 120 mm stroke ensure high torque; the head tilts by ± 60° and the manual vertical feed has 0.02 mm graduations. The 1.5 kW motor runs on 230 V.

A pillar drill is a stationary drilling machine on a column or magnetic base for accurate, perpendicular holes; this category also includes chucks and drill vices.

What it is for

Used for drilling steel, stainless steel and aluminium, on a pillar drill or with a hand-held drill, for milling faces, shoulders and slots on machine tools and in workshop machining of steel, aluminium and alloy parts.

How to use it

Clamp the workpiece in the vice, or fix the magnetic base to clean steel; never hold the workpiece by hand. Fit the bit in the chuck and tighten it firmly, set the speed according to diameter and material and drill with a steady feed, using coolant on metals. Wear safety glasses, no gloves near the chuck, and keep sleeves and hair tied back.

Where it is used

• Mechanical engineering industry
• Mechanical workshops

Technical data

• Cast iron drilling capacity with pilot hole (mm): Ø 40
• Maximum drilling capacity in steel with pilot hole, S235JR (mm): Ø 32
• Routing capacity with insert cutter (mm): Ø 80
• Routing capacity with cylindrical cutter (mm): Ø 32
• Tapping capacity: M27 (cast iron) - M24 (steel)
• Morse taper: CM 4
• Chuck: 1 ÷ 13 mm B16
• Spindle speed: (6) 75 – 1600 rpm
• Spindle travel (mm): 120
• Spindle rotation: Dx - Sx
• Collar (mm): Ø 75
• Head tilt: ± 60º
• Manual vertical feed division (mm): 0,02
• Spindle axis to column distance (mm): 240

Who it is for

Designed for industrial maintenance technicians and mechanics.

Related products

• Geared bench mill-drill Fervi T044/400V
• Geared mill-drill Fervi T047/400VDA
• Extreme 2 metal drill bits single-pack in blister DeWalt DT5044-QZ — from the category Metal Drill Bits
• Hole saw Fervi F015/019 — from the category Professional Hole Saws and Hole Cutters
• Over-glasses UN5X7 — from the category Safety Glasses, Goggles and Face Shields
• Browse the whole category: Pillar Drills

Before you order

Tell us the quantities you need and the intended use: if there is a more suitable version, or an equivalent available sooner, we will let you know.

For prices and availability, request a quote from AMES Srl: we will reply with our quotation, delivery times and, where needed, an equivalent technical alternative.