Hole saw HM/TC

What it is

Hole saw HM/TC. Key specifications: cutting capacity (mm) 55, material Hard metal (tungsten carbide).

A hole saw is a toothed cup which, fitted to a drill with an arbor and pilot drill, cuts large-diameter holes in wood, metal, plastic and plasterboard.

What it is for

Used for drilling wood and panels and for drilling steel, stainless steel and aluminium, on a pillar drill or with a hand-held drill.

How to use it

Fit the hole saw to the arbor with the pilot drill and tighten it in the chuck, setting a lower speed for large diameters and for metal. Centre the hole with the pilot drill and drill square to the surface without hammer action, lubricating on metal. Remove the slug left in the hole saw with the machine stopped, using a screwdriver through the slots.

Where it is used

• Building services

Technical data

• Cutting capacity (mm): 55
• Material: Hard metal (tungsten carbide)

Who it is for

Designed for electricians, plumbers and heating and plumbing engineers.

Related products

• Hole saws
• Replacement bits for shafts
• Cordless drill driver 18V AEG BS18SBL — from the category Drill Drivers
• Extreme 2 metal drill bits DeWalt DT5563-QZ — from the category Metal Drill Bits
• Belt-driven radial bench drill Fervi 0757 — from the category Pillar Drills
• Browse the whole category: Hole Saws

Before you order

Tell us the quantities you need and the intended use: if there is a more suitable version, or an equivalent available sooner, we will let you know.

For prices and availability, request a quote from AMES Srl: we will reply with our quotation, delivery times and, where needed, an equivalent technical alternative.