2D machine control solution iCON iGG2 Leica

What it is

The iCON iGG2 2D machine control solution Leica - Machine control is intended for professional use in the following contexts:

The machine control system is a set of sensors, antennas or instruments and a display, mounted on excavators, graders and other earthmoving machines, which shows the operator the height relative to the design.

What it is for

Used for levelling surfaces and structures and for setting out and in earthmoving work.

How to use it

It is installed and calibrated by specialist personnel. The operator loads the design, checks the position on a known point before working and follows the indications on the display. Keep the sensors clean and protected from knocks, and recheck the calibration if an error is detected.

Where it is used

• Road and motorway construction
• Civil engineering
• Earthmoving and excavation

Technical data

• Type: 2D machine control system for motor graders
• Panel display: MCP50: 5"; MCP70: 7" (multi-touch colour TFT, 800 x 480 pixels)
• Panel protection rating (IP): IP66
• Panel operating temperature (°C): da -20 a +70
• Panel voltage (V): 9-32 VDC
• Panel weight (g): MCP50: 725; MCP70: 1050
• Smart Junction Box SJB2x – protection rating (IP): IP67
• Smart Junction Box SJB2x – voltage (V): 9-34 VDC
• MLS820 laser receiver – reception window (cm): 33 (with Rugby CLA800)
• MLS820 laser receiver – reception angle (°): 360 (with Rugby CLA800)
• MLS820 laser receiver – protection rating (IP): IP66
• Trisonic MUS1400 sensor – protection rating (IP): IP67

Who it is for

Designed for site managers, excavator operators and surveyors.

Standards and compliance

Reference standards: CE marking in accordance with the EU directives applicable to the machine control sector, compliance with current technical and safety standards, technical documentation supplied by the manufacturer Leica.

2D machine control solution iCON iGG2 Leica (Leica) — 2D smart grading solutions for motor graders. Leica iGG2 solutions for graders increase machine utilisation, productivity and material efficiency on any earthmoving and precision grading contract. The solution can be used with a wide range of sensors and combines ease of use with a flexible, intuitive user interface. The new tri-sonic sensor is used on graders to maintain grade and slope by following the stringline or an existing kerb. When the machine is running in automatic mode, the tri-sonic sensor maintains grade and slope by following the stringline or an existing kerb. Benefit from a simplified 2D solution with innovative, optimised sensors and upgrade it easily when the job site calls for greater automation, documentation and accuracy. Integrate the MCP80 panel, the MC1 software and the GNSS or radio antennas and prism to move up to the 3D solution without having to replace sensors and cables.

Related products

• 3D machine control solution iCON iGD3 Leica
• M-Com mobile communication solution Leica
• Tilt support 0-90° Metrica — from the category Laser Accessories
• Tripod for laser level DeWalt DE0736-XJ — from the category Laser Level Accessories
• Battery Varta Energy — from the category Household Batteries
• Browse the whole category: Laser Measuring Tools and Accessories

Before you order

In your request, please state the supply voltage and the quantities required, so we can give you the right quotation first time.

For prices and availability, request a quote from AMES Srl: we will reply with our quotation, delivery times and, where needed, an equivalent technical alternative.