A.M.E.S. srlTwister SDS-Plus bits
Drill concrete, brick and stone for wall plugs and anchors using a hammer drill.
All A.M.E.S. srl products
Anchor TAM with Hex Head Screw
Also known as: masonry anchor
Key features
- MaterialSteel
- FinishGalvanised
- Screw materialSteel
- Anchor diameter x length (mm)10x49, 12x56, 15x69, 18x86
- Maximum fixable thickness (mm)10, 20, 25
What it is
Anchor TAM with Hex Head Screw. Key specifications: material Steel, finish Galvanised, screw material Steel.
A sleeve anchor is a metal expansion anchor, made up of a bolt and sleeve, that expands in the hole when tightened, for fixings in concrete and solid masonry.
What it is for
Used for anchoring shelves, brackets and structures to walls and for mechanical fixing of structures and components to walls, ceilings and floors.
How to use it
Drill the substrate to the anchor diameter and to a depth at least equal to its length, then clear the dust from the hole. Insert the anchor through the fixture and tap it home until it seats. Tighten the nut or screw with a spanner until expansion is felt, without exceeding the torque stated by the manufacturer.
Where it is used
- Industrial construction
- Residential construction
- Building services
Technical data
- Material: Steel
- Finish: Galvanised
- Screw material: Steel
- Anchor diameter x length (mm): 10x49, 12x56, 15x69, 18x86
- Maximum fixable thickness (mm): 10, 20, 25
Who it is for
Designed for formwork carpenters, electricians, metal fabricators and bricklayers.
Related products
- TAM steel plugs
- Anchor TAM with Eyelet
- granit drill bits — from the category Drill Bits for Granite, Masonry and Concrete
- L-shaped rotary hammer SDS-Plus, 3 modes, 30mm, 3.5J, 950W, with AVC, 375mm, DeWalt — from the category Rotary Hammers
- Combination spanners, art. 1030 — from the category Combination Spanners
- Browse the whole category: Sleeve Anchors
Before you order
In your request, please state the length, the diameter and the quantities required, so we can give you the right quotation first time.
For prices and availability, request a quote from AMES Srl: we will reply with our quotation, delivery times and, where needed, an equivalent technical alternative.
Quantity
Specifications 5
| Material | Steel |
|---|---|
| Finish | Galvanised |
| Screw material | Steel |
| Anchor diameter x length (mm) | 10x49, 12x56, 15x69, 18x86 |
| Maximum fixable thickness (mm) | 10, 20, 25 |
The perfect setup for this job
Everything you need in one place, from functionality to safety.
For the job
A.M.E.S. srlCordless rotary hammer CRHLI202287
Drill concrete, masonry and stone by combining rotation and hammer action.
A.M.E.S. srlSet of combination spanners HM
Tighten and loosen nuts and bolts with the open end or the polygonal ring end.
A.M.E.S. srlSDS-Plus drill bit and chisel set
Drill and chisel concrete and masonry with the quick-release fitting of light rotary hammers.
For safety
A.M.E.S. srlSafety glasses ET 81 BS
Protect eyes and face from fragments, dust, splashes and impacts.