Chemical Anchor Epobar, SPIT

What it is

SPIT Epobar chemical anchor in a 410 ml cartridge, grey resin with CE marking and European Technical Assessment ETA-08/0201. At 20 °C it gels in 6 minutes and hardens in 110 minutes: the time available to place the element is short, but the fixing can be loaded after less than two hours. In the SPIT catalogue the Epobar line, now EPOBAR+, is the one developed for post-installed reinforcing bars.

Chemical anchor is a two-component resin in a cartridge that, injected into the drilled hole, bonds threaded rods and internally threaded sockets to the substrate; the category includes mesh sleeves and injection accessories.

What it is for

Used for chemical anchoring, where the load or edge distance rules out a mechanical anchor, for strengthening masonry and concrete structures and for structural fixings, where the fixing is load-bearing and must be calculated.

How to use it

Drill the substrate to the specified diameter and depth, clean the hole with a brush and blow-out pump, repeating several times, and insert a mesh sleeve in hollow brick. Discard the first resin until the colour is uniform, inject from the bottom of the hole and insert the rod with a twisting motion. Apply load only after the curing time stated for the substrate temperature.

Where it is used

• Industrial construction
• Civil engineering
• Renovation

Technical data

• Capacity (ml): 410
• Resin colour: Grey
• Curing time at 20 °C: 110 min
• Gel time at 20 °C: 6 min
• ETA approval: ETA-08/0201

Who it is for

Designed for formwork carpenters, steel fixers and bricklayers.

Related products

• Chemical Anchor Epobar, SPIT 328736
• Chemical Anchor Epcon C8Xtrem, SPIT
• Straight-cut threaded rods M16 x 190 mm (pack of 10) DeWalt DFC4130600 — from the category Threaded Rods
• Pneumatic injection gun 450 ml SPIT 151284 — from the category Adhesive and Sealant Application Systems
• SDS-Plus bit XT 3 with 3 cutting edges for concrete SPIT — from the category Drill Bits for Granite, Masonry and Concrete
• Browse the whole category: Chemical Anchors

Before you order

In your request, please state the colour and the quantities required, so we can give you the right quotation first time.

For prices and availability, request a quote from AMES Srl: we will reply with our quotation, delivery times and, where needed, an equivalent technical alternative.