Skip to content
0 Quotes 0Compare
All Pedrollo products

Electric pump CKR Pedrollo

Also known as: electric water pump

Code CKR

Key features

  • CapacityUp to 70 l/min (4.2 m³/h)
  • Head (m)up to 60
  • Gauge suction height (m)up to 9
  • Liquid temperatureFrom -10 °C to +90 °C
  • Ambient temperatureUp to +40 °C
  • Max pressure in the pump body (bar)6
See all 12 specifications

What it is

CKR (code CKR) is a Pedrollo electric pump — self-priming liquid ring electric pumps, with flow rate up to 70 l/min (4.2 m³/h), head up to 60 m, manometric suction lift up to 9 m. Professional product, reliable for intensive use.

A clean water pump is a surface or submersible electric pump that lifts or pressurises clear water from wells, cisterns and tanks.

What it is for

Used in irrigation systems, from the water supply point to the emitter and for pumping water out of excavations, tanks and sumps.

How to use it

Install surface pumps on a level base close to the draw-off point, with a foot valve on the suction pipe, and fill them with water before first start-up; lower submersible pumps suspended on a rope. Use them only with clean, sand-free water and never let them run dry. Connect them to a circuit protected by an RCD and, in winter, drain outdoor pumps to protect them from frost.

Where it is used

  • Agriculture
  • Building services
  • Water engineering works

Technical data

  • Capacity: Up to 70 l/min (4.2 m³/h)
  • Head (m): up to 60
  • Gauge suction height (m): up to 9
  • Liquid temperature: From -10 °C to +90 °C
  • Ambient temperature: Up to +40 °C
  • Max pressure in the pump body (bar): 6
  • Motor: 2-pole
  • IP protection rating: IPX4
  • Pump body: Cast iron
  • Impeller: Bronze
  • Shaft: Stainless steel AISI 431
  • Lantern: Aluminium with brass lid

Who it is for

Designed for plumbers, agricultural workers and heating and plumbing engineers.

Related products

Before you order

In your request, please state the rated load or flow rate and the quantities required, so we can give you the right quotation first time.

For prices and availability, request a quote from AMES Srl: we will reply with our quotation, delivery times and, where needed, an equivalent technical alternative.

Quantity
Specifications 12
CapacityUp to 70 l/min (4.2 m³/h)
Head (m)up to 60
Gauge suction height (m)up to 9
Liquid temperatureFrom -10 °C to +90 °C
Ambient temperatureUp to +40 °C
Max pressure in the pump body (bar)6
Motor2-pole
IP protection ratingIPX4
Pump bodyCast iron
ImpellerBronze
ShaftStainless steel AISI 431
LanternAluminium with brass lid

The perfect setup for this job

Everything you need in one place, from functionality to safety.

For the job