A.M.E.S. srlNon-toxic coiled hose
Carry water for irrigating, washing and supplying machines in the garden and on site.
All Pedrollo products
Electric pump CP Pedrollo
Also known as: electric water pump
Key features
- CapacityUp to 160 l/min (9.6 m³/h)
- Head (m)up to 76
- Gauge suction height (m)up to 7
- Liquid temperatureFrom -10 °C to +90 °C
- Ambient temperatureFrom -10 °C to +40 °C
- Max pressure in the pump body6 bar for CP 100-130-132-150-158 – 10 bar for CP 170-190-200
What it is
CP (code CP) is a Pedrollo electric pump — single-impeller centrifugal electric pumps, with flow rate up to 160 l/min (9.6 m³/h), head up to 76 m, manometric suction lift up to 7 m. Professional product, reliable for intensive use.
A clean water pump is a surface or submersible electric pump that lifts or pressurises clear water from wells, cisterns and tanks.
What it is for
Used in irrigation systems, from the water supply point to the emitter and for pumping water out of excavations, tanks and sumps.
How to use it
Install surface pumps on a level base close to the draw-off point, with a foot valve on the suction pipe, and fill them with water before first start-up; lower submersible pumps suspended on a rope. Use them only with clean, sand-free water and never let them run dry. Connect them to a circuit protected by an RCD and, in winter, drain outdoor pumps to protect them from frost.
Where it is used
- Agriculture
- Building services
- Water engineering works
Technical data
- Capacity: Up to 160 l/min (9.6 m³/h)
- Head (m): up to 76
- Gauge suction height (m): up to 7
- Liquid temperature: From -10 °C to +90 °C
- Ambient temperature: From -10 °C to +40 °C
- Max pressure in the pump body: 6 bar for CP 100-130-132-150-158 – 10 bar for CP 170-190-200
- Motor: 2-pole
- IP protection rating: IPX4
- Pump body: Cast iron
- Impeller: Stainless steel AISI 304
- Shaft: Stainless steel AISI 431
- Lid: Stainless steel AISI 304, cast iron for CP 170-170M-190-200
Who it is for
Designed for plumbers, agricultural workers and heating and plumbing engineers.
Related products
- Electric pump CP-ST Pedrollo
- Electric pump CKR Pedrollo
- Microtube 4 mm art. 2772 — from the category Water Hoses and Layflat Hoses
- Brass nipples, art. 298 — from the category Galvanised Pipe Fittings
- Modular underground tanks, Nanotank "Canotto" shape, polyethylene, Rototec — from the category Tanks, Cisterns and Drums for Liquid Storage
- Browse the whole category: Clean Water Pumps
Before you order
In your request, please state the rated load or flow rate and the quantities required, so we can give you the right quotation first time.
For prices and availability, request a quote from AMES Srl: we will reply with our quotation, delivery times and, where needed, an equivalent technical alternative.
Quantity
Specifications 12
| Capacity | Up to 160 l/min (9.6 m³/h) |
|---|---|
| Head (m) | up to 76 |
| Gauge suction height (m) | up to 7 |
| Liquid temperature | From -10 °C to +90 °C |
| Ambient temperature | From -10 °C to +40 °C |
| Max pressure in the pump body | 6 bar for CP 100-130-132-150-158 – 10 bar for CP 170-190-200 |
| Motor | 2-pole |
| IP protection rating | IPX4 |
| Pump body | Cast iron |
| Impeller | Stainless steel AISI 304 |
| Shaft | Stainless steel AISI 431 |
| Lid | Stainless steel AISI 304, cast iron for CP 170-170M-190-200 |
The perfect setup for this job
Everything you need in one place, from functionality to safety.
For the job
PedrolloElectronic pressure regulator EASYPRESS PedrolloCode EASYPRESS
Connect and fit out pumps, tanks and cisterns so that the water system works.
A.M.E.S. srlBrass socket art. 297
Join pipes and components of water systems with threaded joints and reducers.
PedrolloThree-phase control panel for electric pumps QST PedrolloCode QST
Distribute power on site and protect people and tools from overloads and earth leakage.