Anchor heavy loads to concrete and solid masonry, where plastic plugs are not enough.

Right upright for permanent guardrail CSC Edilizia 119 UD
Key features
- MaterialS235JR (Fe 360 B)
- RegulationsUNI-ISO 2768
- DimensionsNo. 2 holes R28 R20 22 R6 428; sheet thickness 8 mm
What it is
The CSC Edilizia 119 UD right-hand post is a structural element for safety guardrails, made of S235JR (Fe 360 B) steel. It is made from 8 mm thick sheet and fitted with two fixing holes, in accordance with the general tolerances of UNI-ISO 2768. It forms the right-hand side upright of the perimeter protection system.
A permanent guardrail is a fixed aluminium or steel fall protection system, also with mesh panels, installed on roofs, edges, balconies and inspection pits.
What it is for
Used for fall protection, as part of a fall arrest or work restraint system and for protecting edges and corners.
How to use it
Check that the supporting structure (slab, parapet wall or roof) can bear the loads specified by the manufacturer. Assemble the posts, rails and toe boards following the manual and secure them with the specified anchors, leaving no gaps. Inspect the fixings and check for corrosion regularly, as required by the manufacturer.
Where it is used
- Commercial construction
- Industrial construction
- Workplace safety and PPE
Technical data
- Material: S235JR (Fe 360 B)
- Regulations: UNI-ISO 2768
- Dimensions: No. 2 holes R28 R20 22 R6 428; sheet thickness 8 mm
Who it is for
Designed for formwork carpenters, building maintenance operatives and health and safety officers.
Related products
- Straight Post CSC Edilizia
- Right upright for permanent guardrail CSC Edilizia
- Chemical Anchor Epcon C8Xtrem, SPIT — from the category Chemical Anchors
- Lifeline 16 m two-pitch H40 cm CSC Edilizia 604C-16M-614-16M-614C-16M — from the category Horizontal and Vertical Lifeline Anchors
- Intermediate section, 4 rungs, for caged ladder CSC Edilizia 379B — from the category Caged Safety Ladders
- Browse the whole category: Permanent Guardrails and Safety Nets
Before you order
Tell us the quantities you need and the intended use: if there is a more suitable version, or an equivalent available sooner, we will let you know.
For prices and availability, request a quote from AMES Srl: we will reply with our quotation, delivery times and, where needed, an equivalent technical alternative.
Specifications 3
| Material | S235JR (Fe 360 B) |
|---|---|
| Regulations | UNI-ISO 2768 |
| Dimensions | No. 2 holes R28 R20 22 R6 428; sheet thickness 8 mm |
The perfect setup for this job
Everything you need in one place, from functionality to safety.
For the job
Bond threaded rods and sleeves into the hole for heavy-duty fixings in concrete and masonry.
Fix to the roof the points where lifelines and fall protection devices are attached.
Fasten steel sheets, profiles and roofing, even drilling into the metal by themselves.
For safety
Protect against falls from height by supporting the body during work at height.





