Power and recharge cordless tools of the same system to keep working without stopping.

Combination hammer 45mm 10.5J XR FlexVolt 54V 2 x FV 9.0Ah DeWalt
Key features
- Width (mm)112
- No load speed (rpm)190 - 380
- Height (mm)251
- Weight (kg)6,8
- Weight, battery included (kg)8,3
- Power supplyBattery-powered
What it is
The DeWalt DCH614X2-QW is a cordless combination hammer from the 54 V XR FlexVolt platform with SDS-Max connection, supplied in a complete configuration with two 9.0 Ah FlexVolt batteries. It develops a no-load speed of 190 to 380 rpm and is fitted with active vibration control for greater comfort in prolonged work. With a weight of 6.8 kg (8.3 kg with battery included) and robust dimensions – 526 mm long, 251 mm high and 112 mm wide – it offers great power for drilling and demolition on concrete and masonry. The two 9 Ah batteries ensure long run time.
A combination hammer is an SDS-Max hammer that drills with rotation and percussion and, with rotation switched off, chisels concrete and masonry.
What it is for
Used for light demolition, chasing and localised removal, for drilling reinforced concrete, in hammer or rotary hammer mode and for chiselling concrete, masonry and plaster.
How to use it
Make sure there are no cables or pipes at the work point. Insert the clean, greased SDS-Max bit or chisel and select the mode: hammer drilling or chiselling only. Hold the tool with both hands, using the side handle and depth stop, without pushing too hard. Wear safety glasses, hearing protection, a dust mask and gloves.
Where it is used
- Building services
- Renovation
Technical data
- Width (mm): 112
- No load speed (rpm): 190 - 380
- Height (mm): 251
- Weight (kg): 6,8
- Weight, battery included (kg): 8,3
- Power supply: Battery-powered
- Length (mm): 526
- Vibration control: Sì
- Voltage (V): 54
- Battery capacity (Ah): 9,0
- Diameter (mm): 45
- Range: XR
- Perform Protect: Low vibration 8.8 m/s², minimum fatigue
Who it is for
Designed for demolition operatives, electricians, plumbers and bricklayers.
Related products
- Combination hammer 48mm 13.3J XR FlexVolt 54V 2 x FV 9.0Ah DeWalt
- SDS-Max combination hammer, 3 modes, 5 kg, 40 mm, 6.1 J, 1050 W, with AVC, DeWalt
- SDS Max XLR bit 18x540x400mm DeWalt DT60812-QZ — from the category SDS Max Drill Bits
- SDS-Plus chisel, DeWalt DT6803-QZ — from the category Demolition Chisels
- Battery XR Lithium 10.8V 2.0Ah DeWalt DCB127-XJ — from the category Power Tool Batteries and Chargers
- Browse the whole category: Combination Hammers
Before you order
In your request, please state the length, the diameter, the supply voltage and the quantities required, so we can give you the right quotation first time.
For prices and availability, request a quote from AMES Srl: we will reply with our quotation, delivery times and, where needed, an equivalent technical alternative.
Specifications 14
| Width (mm) | 112 |
|---|---|
| No-load speed (rpm) | 190 - 380 |
| Height (mm) | 251 |
| Weight (kg) | 6,8 |
| Weight, battery included (kg) | 8,3 |
| Power supply | Battery-powered |
| Length (mm) | 526 |
| Vibration control | Sì |
| Voltage (V) | 54 |
| Battery capacity (Ah) | 9,0 |
| Diameter (mm) | 45 |
| Range | XR |
| Quick-change chuck | No |
| Perform Protect | Low vibration 8.8 m/s², minimum fatigue |
The perfect setup for this job
Everything you need in one place, from functionality to safety.
For the job
Drill deep, wide holes in concrete and masonry when fitted to heavy rotary hammers.
Break concrete, masonry and tiles when fitted to the demolition hammer or rotary hammer.
For safety
Protect hearing from the noise of machines and tools by reducing the sound reaching the ear.
Protect the airways from dust, fumes, gases and vapours during work.





