DeWaltCompact cordless drill driver 2-speed XR 18V brushless bo...Code DCD800NT-XJ
Drill and drive screws cordless, with an adjustable clutch to avoid stripping the screws.
All DeWalt products
Drill bits HSS-G DIN 338 for metal 7 mm, single pack in blister DeWalt DT5218-QZ
Key features
- Diameter (mm)7
- Working length (mm)69
- Application materialMetal
- Length (mm)109
What it is
The DeWalt DT5218-QZ is an HSS-G drill bit to DIN 338 for drilling metal, with a diameter of 7 mm. It has a working length of 69 mm and a total length of 109 mm, sizes suited to medium-diameter holes in steel, sheet metal and metal sections. It is supplied as a single piece in a blister pack.
A metal drill bit is an HSS, cobalt or coated twist drill for drilling steel, cast iron, non-ferrous metals and plastic with a drill or drill driver.
What it is for
Used for drilling steel, stainless steel and aluminium, on a pillar drill or with a hand-held drill and in workshop machining of steel, aluminium and alloy parts.
How to use it
Mark the centre with a centre punch, clamp the workpiece and drill at a speed that is lower the larger the diameter and the harder the material. Maintain steady pressure, lubricate with cutting oil on steel and stainless steel and, for large diameters, drill a pilot hole first. Withdraw the bit frequently to clear the swarf, and never touch the swarf with bare hands.
Where it is used
- Mechanical engineering industry
- Mechanical workshops
Technical data
- Diameter (mm): 7
- Working length (mm): 69
- Application material: Metal
- Length (mm): 109
Who it is for
Designed for metal fabricators, industrial maintenance technicians and mechanics.
Related products
- Drill bits HSS-G DIN 338 for metal 8 mm, single pack in blister DeWalt DT5219-QZ
- Drill bits HSS-G DIN 338 for metal 6.5 mm, single pack in blister DeWalt DT5217-QZ
- Set of pin punches in soft foam tray Fervi TM01/037 — from the category Scribers and Punches
- Cordless permanent magnet drill XR 18V brushless DeWalt DCD1623X2G-QW — from the category Pillar Drills
- Fixed vices Piher — from the category Vices and Clamps
- Browse the whole category: Metal Drill Bits
Before you order
In your request, please state the length, the diameter and the quantities required, so we can give you the right quotation first time.
For prices and availability, request a quote from AMES Srl: we will reply with our quotation, delivery times and, where needed, an equivalent technical alternative.
Quantity
Specifications 4
| Diameter (mm) | 7 |
|---|---|
| Working length (mm) | 69 |
| Application material | Metal |
| Length (mm) | 109 |
The perfect setup for this job
Everything you need in one place, from functionality to safety.
For the job
DeWaltCordless permanent magnet drill XR 18V brushless DeWalt D...Code DCD1623N-XJ
Drill precise, perpendicular holes with the workpiece clamped beneath the bit.
DeWaltSet of 3 nail punches DeWalt DWHT0-58018Code DWHT0-58018
Mark lines and centres on metal before drilling and drive out pins and dowels.
DeWaltElectric chainsaw oil DeWalt DT20662-QZCode DT20662-QZ
Lubricate two-stroke engines, chains, compressors and hydraulic systems, reducing wear.
For safety
VigorSafety glasses Airy, polycarbonate lens, grade (B), VigorCode 54012-10
Protect eyes and face from fragments, dust, splashes and impacts.