Carry water for irrigating, washing and supplying machines in the garden and on site.

Electric pump F-INOX Pedrollo
Also known as: electric water pump
Key features
- CapacityUp to 2200 l/min (132 m³/h)
- Gauge suction heightUp to 7 m
- Ambient temperatureFrom -10 °C to +40 °C
- Motor2-pole
- Liquid temperatureFrom -10 °C to +90 °C
- Max pressure in the pump body10 bar (PN10)
What it is
Electric pump F-INOX Pedrollo. Key specifications: capacity Up to 2200 l/min (132 m³/h), gauge suction height Up to 7 m, ambient temperature From -10 °C to +40 °C.
A clean water pump is a surface or submersible electric pump that lifts or pressurises clear water from wells, cisterns and tanks.
What it is for
Used in irrigation systems, from the water supply point to the emitter and for pumping water out of excavations, tanks and sumps.
How to use it
Install surface pumps on a level base close to the draw-off point, with a foot valve on the suction pipe, and fill them with water before first start-up; lower submersible pumps suspended on a rope. Use them only with clean, sand-free water and never let them run dry. Connect them to a circuit protected by an RCD and, in winter, drain outdoor pumps to protect them from frost.
Where it is used
- Agriculture
- Building services
- Water engineering works
Technical data
- Capacity: Up to 2200 l/min (132 m³/h)
- Gauge suction height: Up to 7 m
- Ambient temperature: From -10 °C to +40 °C
- Motor: 2-pole
- Liquid temperature: From -10 °C to +90 °C
- Max pressure in the pump body: 10 bar (PN10)
- IP protection rating: IP55
- Head: Up to 37 m
- Pump body: Stainless steel AISI 316
- Impeller: Stainless steel AISI 316
- Shaft: AISI 316L stainless steel
- Housing: Stainless steel AISI 316
Who it is for
Designed for plumbers, agricultural workers and heating and plumbing engineers.
Related products
- Electric pump F4 Pedrollo
- Electric pump F Pedrollo
- Low-density PE pipe PN6 — from the category Water Hoses and Layflat Hoses
- Reducing nipples in galvanised steel — from the category Galvanised Pipe Fittings
- AdBlue tank Tekcnoplast — from the category Tanks, Cisterns and Drums for Liquid Storage
- Browse the whole category: Clean Water Pumps
Before you order
In your request, please state the rated load or flow rate and the quantities required, so we can give you the right quotation first time.
For prices and availability, request a quote from AMES Srl: we will reply with our quotation, delivery times and, where needed, an equivalent technical alternative.
Specifications 12
| Capacity | Up to 2200 l/min (132 m³/h) |
|---|---|
| Gauge suction height | Up to 7 m |
| Ambient temperature | From -10 °C to +40 °C |
| Motor | 2-pole |
| Liquid temperature | From -10 °C to +90 °C |
| Max pressure in the pump body | 10 bar (PN10) |
| IP protection rating | IP55 |
| Head | Up to 37 m |
| Pump body | Stainless steel AISI 316 |
| Impeller | Stainless steel AISI 316 |
| Shaft | AISI 316L stainless steel |
| Housing | Stainless steel AISI 316 |
The perfect setup for this job
Everything you need in one place, from functionality to safety.
For the job
Connect and fit out pumps, tanks and cisterns so that the water system works.
Join pipes and components of water systems with threaded joints and reducers.
Distribute power on site and protect people and tools from overloads and earth leakage.




