FerviGranite reference square Fervi S061Code S061
Mark out and accurately check right angles on mechanical parts in the workshop.
Accessories collection:Analogue Levelling and Marking-Out ToolsLaser Measuring Tools and Accessories
All Fervi products
Continuous-strip feeler gauge Fervi TG075/AE
Also known as: feeler gauge tape, feeler stock roll
Key features
- MaterialSteel
- Thickness0,75 mm | 0,030"
- Length (m)5
- Gross weight (kg)0,57
What it is
Continuous-strip feeler gauge Fervi TG075/AE. Key specifications: material Steel, thickness 0,75 mm | 0,030", length (m) 5.
The feeler gauge measures clearances, gaps and thicknesses. In its most common form it is a set of calibrated blades of known thickness, to be inserted in the gap to be checked; continuous-tape and digital models also exist.
What it is for
Used in quality control of parts and workmanship and for measuring on site and in the workshop.
How to use it
Clean the gap and insert the thinnest blade, moving to increasing thicknesses until it enters with slight drag: that is the clearance value. Do not force the blades or bend them. After use, dry them and put them back in the case to prevent rust. Digital models are used as described in the manual.
Where it is used
- Mechanical engineering industry
- Mechanical workshops
Technical data
- Material: Steel
- Thickness: 0,75 mm | 0,030"
- Length (m): 5
- Gross weight (kg): 0,57
Who it is for
Designed for industrial maintenance technicians and mechanics.
Related products
- Continuous-strip feeler gauge Fervi TG080/AE
- Continuous-strip feeler gauge Fervi TG070/AE
- Markers Pica INK, display stand — from the category Markers and Spray Markers
- Laser distance meter TFR800 A.M.E.S. srl — from the category Laser Distance Meters
- Marking powders (1-47-403) Stanley — from the category Chalk Lines and Marking Chalk
- Browse the whole category: Analogue Distance Measuring Tools
Before you order
In your request, please state the length and the quantities required, so we can give you the right quotation first time.
For prices and availability, request a quote from AMES Srl: we will reply with our quotation, delivery times and, where needed, an equivalent technical alternative.
Quantity
Specifications 4
| Material | Steel |
|---|---|
| Thickness | 0,75 mm | 0,030" |
| Length (m) | 5 |
| Gross weight (kg) | 0,57 |
The perfect setup for this job
Everything you need in one place, from functionality to safety.
For the job
FerviSet of pin punches Fervi C015Code C015
Mark lines and centres on metal before drilling and drive out pins and dowels.
FerviMatt chrome-plated steel scribing block Fervi
Mark out and measure heights on parts resting on the surface plate.
FerviMagnetic V-block Fervi P007/2CCode P007/2C
Measure angles and scribe arcs to mark the part accurately before machining.