FischerMounting profile MS 30/15 and 32/20 FischerCode 8001132025192
Support pipework, trunking and services, fixing them securely to wall or ceiling.
All Fischer products
Quick-fit nut FCN Clix P A4 and FCN Clix M A4 Fischer
Also known as: channel nut
Key features
- Fire test reportSì
- Thread atM10
- Thickness S (mm)8
- Recommended maximum tensile load (kN)5
- Pieces per pack25
- Stainless steelA4
What it is
The Fischer FCN Clix P A4 and FCN Clix M A4 quick-fit nut is an A4 stainless steel nut with an M10 thread and a thickness of 8 mm, able to support a maximum recommended tensile load of 5 kN. It is available with a fire test report and is supplied in packs of 25 pieces.
The channel nut, with a hammer head or hook head, has a shaped head that fits into the channel of a mounting rail and locks in place, so that brackets and loads can be fixed along the rail.
What it is for
Used for mechanical fixing of structures and components to walls, ceilings and floors, for erecting steelwork and structural carpentry and for supporting pipework and ductwork.
How to use it
Slide it into the rail channel and turn it until it engages the edges of the profile. Then fit the screw or threaded rod from the opposite side and tighten to the specified torque, checking that the head is properly seated. Check periodically that it has not worked loose.
Where it is used
- Industrial construction
- Building services
- Industrial plant engineering
Technical data
- Fire test report: Sì
- Thread at: M10
- Thickness S (mm): 8
- Recommended maximum tensile load (kN): 5
- Pieces per pack: 25
- Stainless steel: A4
Who it is for
Designed for electricians, plumbers, HVAC technicians and heating and plumbing engineers.
Related products
- Quick-fit nut FCN Clix P hdg and FCN Clix M hdg Fischer
- Pre-positionable snap-in nut FCN Clix P and FCN Clix M Fischer
- Threaded rod by the metre, class 4.6/4.8, Fischer — from the category Threaded Rods
- Washer for seismic applications FFD C2 Fischer — from the category Flat Washers
- Pre-assembled bolt PFCN Fischer — from the category Bolts and Metric Screws
- Browse the whole category: Hex Nuts
Before you order
Tell us the quantities you need and the intended use: if there is a more suitable version, or an equivalent available sooner, we will let you know.
For prices and availability, request a quote from AMES Srl: we will reply with our quotation, delivery times and, where needed, an equivalent technical alternative.
Quantity
Specifications 6
| Fire test report | Sì |
|---|---|
| Thread at | M10 |
| Thickness S (mm) | 8 |
| Recommended maximum tensile load (kN) | 5 |
| Pieces per pack | 25 |
| Stainless steel | A4 |
Compare with similar models
Technical data declared by the manufacturers. An empty cell means the figure is not declared.
| Feature |
This model
Quick-fit nut FCN Clix P A4 and FCN Clix M A4 Fischer
|
Quick-fit nut FCN Clix P hdg and FCN Clix M hdg Fischer
|
Pre-positionable snap-in nut FCN Clix P and FCN Clix M Fischer
|
|---|---|---|---|
| Brand | Fischer | Fischer | Fischer |
| Fire test report | Sì | Sì | Sì |
| Thread at | M10 | M12 | M12 |
| Thickness S | 8 mm | 9,5 mm | 9,5 mm |
| Recommended maximum tensile load | 5 kN | 5 kN | — |
| Pieces per pack | 25 | 50 | 50 |
| Stainless steel | A4 | — | A4 |
| View product → | View product → |
The perfect setup for this job
Everything you need in one place, from functionality to safety.
For the job
FischerAngle bracket MW 31 Clix 90° FischerCode 4048962265279
Connect rails, beams and supports for fixing services, suspended ceilings and light structures.
FischerThreaded rod by the metre, class 4.6/4.8, FischerCode 4006209209561
Make tie rods, hangers and chemical anchor fixings together with nuts, washers and connectors.
FischerDiamond head screw FHS Clix L FischerCode 8001132040737
Join metal parts, with a nut or in a tapped hole, so they can be taken apart.