FischerSafety lock nut MU-SL R FischerCode 8001132105092
Complete the fixing when screwed onto bolts, screws and threaded rods.
All Fischer products
Threaded rod by the metre, class 4.6/4.8, Fischer
Key features
- Pieces per pack50
- StandardDIN 976-1
- Strength class4,6/4,8
- ThreadDa M6 a M12
- Length (mm)1000
What it is
Threaded rod by the metre grade 4.6/4.8 Fischer is a threaded element complying with DIN 976-1, with a length of 1000 mm and threads available from M6 to M12. The 4.6/4.8 strength grade makes it suitable for the most common fixing applications; it is supplied in packs of 50 pieces.
Threaded rod is steel rod threaded along its entire length which, with nuts, washers and connectors, is used to make tie rods, hangers and chemical anchor fixings.
What it is for
Used for chemical anchoring, where the load or edge distance rules out a mechanical anchor, for structural fixings, where the fixing is load-bearing and must be calculated and for supporting pipework and ductwork.
How to use it
Cut to length with a hacksaw or angle grinder and clean up the thread with a file or by running a nut over it. Screw it into couplers and connectors or set it in the hole with chemical anchor, then tighten with a nut and washer. Choose the property class and finish, zinc-plated or stainless, according to the load and environment.
Where it is used
- Industrial construction
- Residential construction
Technical data
- Pieces per pack: 50
- Standard: DIN 976-1
- Strength class: 4,6/4,8
- Thread: Da M6 a M12
- Length (mm): 1000
Who it is for
Designed for formwork carpenters, electricians, metal fabricators and plumbers.
Related products
- Threaded rod by the metre, class 8.8, Fischer
- Threaded rod (FIS GS M K) Fischer
- MU nut, hot-dip galvanised, Fischer — from the category Hex Nuts
- Washer for seismic applications FFD C2 Fischer — from the category Flat Washers
- Chemical Anchor FIS SB Superbond, Fischer — from the category Chemical Anchors
- Browse the whole category: Threaded Rods
Before you order
In your request, please state the length and the quantities required, so we can give you the right quotation first time.
For prices and availability, request a quote from AMES Srl: we will reply with our quotation, delivery times and, where needed, an equivalent technical alternative.
Quantity
Specifications 5
| Pieces per pack | 50 |
|---|---|
| Standard | DIN 976-1 |
| Strength class | 4,6/4,8 |
| Thread | Da M6 a M12 |
| Length (mm) | 1000 |
The perfect setup for this job
Everything you need in one place, from functionality to safety.
For the job
FischerDD dielectric insulation and centring device for threaded...
Bond threaded rods and sleeves into the hole for heavy-duty fixings in concrete and masonry.
FischerWasher for seismic applications FFD C2 FischerCode FFD
Spread the load under nuts and screws and stop the fixing coming loose.
FerviSet of polished chrome combination spanners Fervi 0204Code 0204
Tighten and loosen nuts and bolts with the open end or the polygonal ring end.