Bond threaded rods and sleeves into the hole for heavy-duty fixings in concrete and masonry.

Eyelet Fis A OH Fischer
Key features
- Hole diameter d0 (mm)8
- Pieces per pack50
- Diameter (mm)8
What it is
The Fischer Fis A OH eyelet is an element with a suspension ring intended for use with chemical anchors, for which a hole diameter of 8 mm is specified. It is supplied in a pack of 50 pieces, a practical quantity for repeated jobs and for stocking.
An eyebolt is a ring-shaped attachment point, screw-in or weld-on, used for lifting loads or anchoring scaffolding, ropes and tie rods.
What it is for
Used for anchoring shelves, brackets and structures to walls, for chemical anchoring, where the load or edge distance rules out a mechanical anchor and for structural fixings, where the fixing is load-bearing and must be calculated.
How to use it
Choose the eyebolt according to the load and the direction of pull specified by the manufacturer, checking that the thread matches the hole or anchor. Screw it fully home until the collar sits firmly on the surface, or weld it on according to the instructions if it is a weld-on type. Before each use, check for deformation, cracks or wear, and allow for the reduced capacity when pulling at an angle.
Where it is used
- Industrial construction
- Residential construction
- Renovation
Technical data
- Hole diameter d0 (mm): 8
- Pieces per pack: 50
- Diameter (mm): 8
Who it is for
Designed for formwork carpenters, metal fabricators, plumbers and bricklayers.
Related products
- Tie rod AG Fischer
- Cast Iron Anchor GM with Eyelet, Fischer
- Flat webbing slings PowerStar 2-ply 500 kg-10t SpanSet — from the category Lifting Slings
- Galvanised eye-and-hook turnbuckles, blister pack - 6x1/4x1 — from the category Chains and Accessories
- American-type lifting hooks — from the category Lifting and Towing Hooks
- Browse the whole category: Eye Bolts and Lifting Eyes
Before you order
In your request, please state the diameter and the quantities required, so we can give you the right quotation first time.
For prices and availability, request a quote from AMES Srl: we will reply with our quotation, delivery times and, where needed, an equivalent technical alternative.
Specifications 3
| Hole diameter d0 (mm) | 8 |
|---|---|
| Pieces per pack | 50 |
| Diameter (mm) | 8 |
The perfect setup for this job
Everything you need in one place, from functionality to safety.
For the job
Dispense and mix adhesives, sealants, foams and chemical anchors in the right dose and at the right point.
Drill concrete, brick and stone for wall plugs and anchors using a hammer drill.



