Combination rotary hammer SDS-Max compatible Makita HR4003C

What it is

Combination rotary hammer SDS-Max compatible Makita HR4003C. Key specifications: absorbed power (W) 1100, no load speed (rpm) 250 - 500, blows per minute (bpm) 1450 - 2900.

A combination hammer is an SDS-Max hammer that drills with rotation and percussion and, with rotation switched off, chisels concrete and masonry.

What it is for

Used for drilling reinforced concrete, in hammer or rotary hammer mode and for drilling solid and hollow masonry, clay brick and blocks.

How to use it

Make sure there are no cables or pipes at the work point. Insert the clean, greased SDS-Max bit or chisel and select the mode: hammer drilling or chiselling only. Hold the tool with both hands, using the side handle and depth stop, without pushing too hard. Wear safety glasses, hearing protection, a dust mask and gloves.

Where it is used

• Demolition
• Renovation

Technical data

• Absorbed power (W): 1100
• No load speed (rpm): 250 - 500
• Blows per minute (bpm): 1450 - 2900
• Max hole diameter in concrete (mm): 40
• Impact power: 8,3 J
• Cable length (m): 5,0
• Sound power LwA: 103 dB(A)
• Sound pressure LpA (dB(A)): 95

Who it is for

Designed for demolition operatives, bricklayers and construction workers.

Related products

• Combination rotary hammer SDS-Max compatible Makita HR4013C
• Rotary demolition hammer XGT Makita HR006GZ
• TCT tunnelling bit SDS-Max Milwaukee — from the category SDS Max Drill Bits
• SDS-Plus chisel, DeWalt DT6801-QZ — from the category Demolition Chisels
• Energy kit, LXT®, Makita 197626-8 — from the category Power Tool Batteries and Chargers
• Browse the whole category: Combination Hammers

Before you order

In your request, please state the length, the diameter, the power rating and the quantities required, so we can give you the right quotation first time.

For prices and availability, request a quote from AMES Srl: we will reply with our quotation, delivery times and, where needed, an equivalent technical alternative.