DeWaltSDS Max hollow bit 24 mm DeWalt DT60233-QZCode DT60233-QZ
Drill concrete, brick and stone for wall plugs and anchors using a hammer drill.
All Proind products
Plastic injectors Proind
Also known as: injection packers
Key features
- TypeInjectors for low-pressure injection
- MaterialPlastic
- Operating pressure (bar)1-60
- ValveWatertight with steel ball
- Useinjection of liquid formulations into masonry, treatments on wood and concrete, rising damp
What it is
Plastic injectors Proind. Key specifications: type Injectors for low-pressure injection, material Plastic, operating pressure (bar) 1-60.
Chemical anchor is a two-component resin in a cartridge that, injected into the drilled hole, bonds threaded rods and internally threaded sockets to the substrate; the category includes mesh sleeves and injection accessories.
What it is for
Used for strengthening masonry and concrete structures, for waterproofing roofs, terraces and below-ground structures and for protective and finishing treatments in construction.
How to use it
Drill the substrate to the specified diameter and depth, clean the hole with a brush and blow-out pump, repeating several times, and insert a mesh sleeve in hollow brick. Discard the first resin until the colour is uniform, inject from the bottom of the hole and insert the rod with a twisting motion. Apply load only after the curing time stated for the substrate temperature.
Where it is used
- Building maintenance
- Conservation and restoration
- Renovation
Technical data
- Type: Injectors for low-pressure injection
- Material: Plastic
- Operating pressure (bar): 1-60
- Valve: Watertight with steel ball
Who it is for
Designed for waterproofing specialists, bricklayers and restorers.
Related products
- Chemical Anchor CMix Plus, SPIT
- Replacement resin capsules for anchor BAT'INOX Petzl G103AA00
- Threaded rod kit, M16x500, CSC Edilizia 419 — from the category Threaded Rods
- Cleaning brush handle SPIT — from the category Adhesive and Sealant Application Systems
- 4-flute SDS-plus bit DeWalt DT9694-QZ — from the category Drill Bits for Granite, Masonry and Concrete
- Browse the whole category: Chemical Anchors
Before you order
Tell us the quantities you need and the intended use: if there is a more suitable version, or an equivalent available sooner, we will let you know.
For prices and availability, request a quote from AMES Srl: we will reply with our quotation, delivery times and, where needed, an equivalent technical alternative.
Quantity
Specifications 5
| Type | Injectors for low-pressure injection |
|---|---|
| Material | Plastic |
| Operating pressure (bar) | 1-60 |
| Valve | Watertight with steel ball |
| Use | injection of liquid formulations into masonry, treatments on wood and concrete, rising damp |
The perfect setup for this job
Everything you need in one place, from functionality to safety.
For the job
ProindWaterproofing water repellent for masonry against rising ...
Stop water getting through roofs, terraces, foundations and bathrooms with a continuous layer.
For safety
NeriGlove P 85 Neri 360018Code 360018
Protect hands from abrasion, dirt, liquids and minor cuts while keeping a firm grip.