INGCO
Lump hammers Ingco
Key features
- MaterialCarbon steel
- Available weights (kg)0,8, 1, 1,5, 2
- Handle materialFibreglass
- Weight (g)800, 1000, 1500, 2000
What it is
Lump hammers Ingco. Key specifications: material Carbon steel, handle material Fibreglass, weight (g) 800, 1000, 1500, 2000.
A club hammer is a heavy double-faced hammer with a short handle, used to strike chisels, points and stakes and for light demolition.
What it is for
Used for light demolition, chasing and localised removal, in masonry work, from laying blocks to filling chases and for chiselling concrete, masonry and plaster.
How to use it
Grip the handle towards its end and strike the chisel or stake squarely with the face, holding the tool with your other hand or a hand guard. Check that the head is not chipped and that the handle is sound and firmly fixed. Wear safety glasses and gloves.
Where it is used
- Demolition
- Residential construction
- Renovation
Technical data
- Material: Carbon steel
- Handle material: Fibreglass
- Weight (g): 800, 1000, 1500, 2000
Who it is for
Designed for formwork carpenters, demolition operatives, marble and stone masons and bricklayers.
Related products
- Lump hammers for bricklayers
- Bricklayer's lump hammers 'MIX'
- SDS-Plus chisel, DeWalt DT6801-QZ — from the category Demolition Chisels
- Chisel Assortment art. 38/B6N — from the category Cold Chisels
- Mesh visor Portwest PF20 — from the category Safety Glasses, Goggles and Face Shields
- Browse the whole category: Club Hammers
Before you order
Tell us the quantities you need and the intended use: if there is a more suitable version, or an equivalent available sooner, we will let you know.
For prices and availability, request a quote from AMES Srl: we will reply with our quotation, delivery times and, where needed, an equivalent technical alternative.
Quantity
Specifications 4
| Material | Carbon steel |
|---|---|
| Available weights (kg) | 0,8, 1, 1,5, 2 |
| Handle material | Fibreglass |
| Weight (g) | 800, 1000, 1500, 2000 |
The perfect setup for this job
Everything you need in one place, from functionality to safety.
For the job
A.M.E.S. srlFlat chisels, art. 34
Cut sheet metal, shear rivets and bolts and chip off deposits with hammer blows.
A.M.E.S. srlFlat tapered pin punches art. 730
Mark lines and centres on metal before drilling and drive out pins and dowels.
For safety
A.M.E.S. srlExtra cowhide glove
Protect hands from abrasion, dirt, liquids and minor cuts while keeping a firm grip.