Skip to content
0 Quotes 0Compare
All Breaker products

Engine-driven pump PA 2" Breaker

Key features

  • TypeMotor pump with submersible impeller
  • Flow rate (l/min)950
  • Max head (m)20
  • Hose length (m)6
  • Hose connectionbayonet
  • Water outlet2" / 50 mm
See all 9 specifications

What it is

Engine-driven pump PA 2" Breaker. Key specifications: type Motor pump with submersible impeller, flow rate (l/min) 950, max head (m) 20.

A dirty water pump is an electric pump or engine-driven pump that draws water containing mud, sand or solids from excavations, sumps, tanks and flooded rooms.

What it is for

Used for water drainage and for pumping water out of excavations, tanks and sumps.

How to use it

Lower the submersible pump to the lowest point, suspended by a rope attached to the handle (never by the cable), and rest it on firm ground; set the engine-driven pump on a level surface, prime it by filling the pump casing with water and immerse the suction hose with its strainer. Connect the delivery hose without kinks, start the pump and check that it does not run dry. After use, run it in clean water to flush it out.

Where it is used

  • Earthmoving and excavation
  • Water engineering works
  • Civil protection

Technical data

  • Type: Motor pump with submersible impeller
  • Flow rate (l/min): 950
  • Max head (m): 20
  • Hose length (m): 6
  • Hose connection: bayonet
  • Water outlet: 2" / 50 mm
  • Pump weight with hose (kg): 21
  • Drive unit weight (kg): 22
  • Equipment supplied: Pump, hose, drive unit

Who it is for

Designed for plumbers, construction labourers and construction workers.

Related products

Before you order

In your request, please state the length, the rated load or flow rate, the connection type and the quantities required, so we can give you the right quotation first time.

For prices and availability, request a quote from AMES Srl: we will reply with our quotation, delivery times and, where needed, an equivalent technical alternative.

Quantity
Specifications 9
TypeMotor pump with submersible impeller
Flow rate (l/min)950
Max head (m)20
Hose length (m)6
Hose connectionbayonet
Water outlet2" / 50 mm
Pump weight with hose (kg)21
Drive unit weight (kg)22
Equipment suppliedPump, hose, drive unit

The perfect setup for this job

Everything you need in one place, from functionality to safety.

For the job

BreakerHose clamp Breaker

Clamp hoses, sleeves and cables to secure them to fittings and supports.

HusqvarnaCombination can HusqvarnaCode husqvarna-tanica-combinata-husqvarna

Carry, decant and dispense fuels and technical fluids without spillage.