Pump PP1 Breaker

What it is

Pump PP1 Breaker. Key specifications: type Pneumatic water pump, weight (kg) 19,5, length (mm) 425.

A dirty water pump is an electric pump or engine-driven pump that draws water containing mud, sand or solids from excavations, sumps, tanks and flooded rooms.

What it is for

Used for water drainage and for pumping water out of excavations, tanks and sumps.

How to use it

Lower the submersible pump to the lowest point, suspended by a rope attached to the handle (never by the cable), and rest it on firm ground; set the engine-driven pump on a level surface, prime it by filling the pump casing with water and immerse the suction hose with its strainer. Connect the delivery hose without kinks, start the pump and check that it does not run dry. After use, run it in clean water to flush it out.

Where it is used

• Mining and quarrying
• Earthmoving and excavation
• Water engineering works

Technical data

• Type: Pneumatic water pump
• Weight (kg): 19,5
• Length (mm): 425
• Air connection: 3/4"
• Air consumption (l/min): 2820 at 6 bar
• Power (kW): 2,2
• Flow rate (l/min): 930 max
• Max head (m): 30,5
• Drain outlet: 2"
• Min water depth (mm): 22

Who it is for

Designed for site managers, industrial maintenance technicians and construction workers.

Related products

• Pump PP2 Breaker
• Pneumatic pump PP1 Breaker
• Set of 1/2'' flexible hoses with hose reel Kärcher — from the category Water Hoses and Layflat Hoses
• Generator RGU12PO (60 Hz) Genmac — from the category Portable and Wheeled Generating Sets
• Elastic cords, set of 2, plastic hooks, 8x2000 mm, Vigor — from the category Synthetic Ropes and Lines
• Browse the whole category: Electric and Engine-Driven Pumps for Dirty Water and Wastewater

Before you order

In your request, please state the length, the power rating, the rated load or flow rate and the quantities required, so we can give you the right quotation first time.

For prices and availability, request a quote from AMES Srl: we will reply with our quotation, delivery times and, where needed, an equivalent technical alternative.