ProbstHydraulic kerb-laying clamp VZ-HS-50/150 ProbstCode VZ-HS-50
Lift and lay kerbs, setts and paving blocks by hand or with the excavator, sparing the back.
All Probst products
BOBPLAN BP bedding preparation device for kerbs Probst
Key features
- TypeTraction device for preparing the concrete bed for kerbs
- Dimensions (mm)1532x277x146
- Length (mm)1532 / 2760
- Weight (kg)15
- Internal height (mm)195-335
- Working width (mm)270
What it is
BOBPLAN BP bedding preparation device for kerbs Probst. Key specifications: type Traction device for preparing the concrete bed for kerbs, dimensions (mm) 1532x277x146, length (mm) 1532 / 2760.
Levelling and marking tools include spirit levels, straightedges, rules, chalk lines and marking points, used to check surfaces and transfer measurements and alignments.
What it is for
Used for pouring concrete, from formwork to vibration, for levelling surfaces and structures and for setting out and for laying kerbs.
How to use it
Before using a level, check its calibration by taking a reading, turning it through 180° on the same spot and reading again: the two readings must match. To measure, place the tool on clean surfaces and read the bubble or scale from directly in front. To mark out, stretch the line taut or mark with the point along a fixed reference. After use, clean off mortar and dust and store the tools without knocking them.
Where it is used
- Road and motorway construction
- Residential construction
- Civil engineering
Technical data
- Type: Traction device for preparing the concrete bed for kerbs
- Dimensions (mm): 1532x277x146
- Length (mm): 1532 / 2760
- Weight (kg): 15
- Internal height (mm): 195-335
- Working width (mm): 270
Who it is for
Designed for bricklayers, construction workers and flooring and paving contractors.
Related products
- Wire guide RSH, Probst
- Levelling Accessory LEVELHANDY LH Probst
- Self-levelling laser level 3 lines 360° XR lithium 10.8V 2.0 Ah red beam DeWalt DCE089D1R-QW — from the category Line Lasers
- Tape measure Antichoc Rubi — from the category Tape Measures
- FatMax marking gauge set (0-47-681) Stanley — from the category Chalk Lines and Marking Chalk
- Browse the whole category: Analogue Levelling and Marking-Out Tools
Before you order
In your request, please state the length and the quantities required, so we can give you the right quotation first time.
For prices and availability, request a quote from AMES Srl: we will reply with our quotation, delivery times and, where needed, an equivalent technical alternative.
Quantity
Specifications 6
| Type | Traction device for preparing the concrete bed for kerbs |
|---|---|
| Dimensions (mm) | 1532x277x146 |
| Length (mm) | 1532 / 2760 |
| Weight (kg) | 15 |
| Internal height (mm) | 195-335 |
| Working width (mm) | 270 |
The perfect setup for this job
Everything you need in one place, from functionality to safety.
For the job
KimiaShrinkage-compensated cementitious mortar for medium-fast...
Repair, render and fill masonry and concrete once mixed.
BarikellFinishing trowel Barikell
Spread, smooth and finish mortars, renders, adhesives and skim coats by hand.
ProbstHydraulic laying clamp HVZ-GENIUS-II ProbstCode HVZ-GENIUS-II
Grip bricks, blocks and panels to lift and lay them with a crane or excavator.