MetricaTry square for marking out Metrica
Mark out and accurately check right angles on mechanical parts in the workshop.
All A.M.E.S. srl products
Automatic centre punch
Key features
- MaterialSteel
- FinishGalvanised
- Bit diameter (mm)3,5, 4, 6
- Force (Nm)20-50, 60-130, 180-250
What it is
Automatic centre punch. Key specifications: material Steel, finish Galvanised, bit diameter (mm) 3,5, 4, 6.
Scribers and punches are steel hand tools for marking lines and centres on metal, stamping letters and numbers and driving out pins.
What it is for
Used in steel fabrication, from cutting to assembly and in metalworking.
How to use it
Scribe the line with the scriber held against a rule or square; place the centre punch on the point and strike it with a hammer to guide the drill bit. Hold letter and number punches square to the workpiece, resting on a rigid base, and strike them once, firmly. Choose pin punches to match the diameter of the pin to be driven out.
Where it is used
- Mechanical engineering industry
Technical data
- Material: Steel
- Finish: Galvanised
- Bit diameter (mm): 3,5, 4, 6
- Force (Nm): 20-50, 60-130, 180-250
Who it is for
Designed for metal fabricators and industrial maintenance technicians.
Related products
- Chrome-plated punches art. 30
- Square awl PB650
- Watchmaker's hammer art. 386 — from the category Claw Hammers, Sledgehammers and Pry Bars
- Rafter square, galvanised steel, Metrica — from the category Precision Squares
- Safety glasses G42 — from the category Safety Glasses, Goggles and Face Shields
- Browse the whole category: Scribers and Punches
Before you order
In your request, please state the diameter and the quantities required, so we can give you the right quotation first time.
For prices and availability, request a quote from AMES Srl: we will reply with our quotation, delivery times and, where needed, an equivalent technical alternative.
Quantity
Specifications 4
| Material | Steel |
|---|---|
| Finish | Galvanised |
| Bit diameter (mm) | 3,5, 4, 6 |
| Force (Nm) | 20-50, 60-130, 180-250 |
The perfect setup for this job
Everything you need in one place, from functionality to safety.
For the job
A.M.E.S. srlFlexible steel upholsterer's rule art. 573, 2 m
Measure lengths and guide the pencil or utility knife for drawing straight lines.
A.M.E.S. srlG-clamps with shaped cast iron body
Hold the workpiece firmly on the bench or machine during machining.
For safety
A.M.E.S. srlSafety glasses ET 81 BS
Protect eyes and face from fragments, dust, splashes and impacts.