MilwaukeeDiamond disc DHTi for granite, engineered stone and porce...
Cut stone, concrete, brick, tiles and asphalt, dry or wet.
All Raimondi products
Saw Bolt 90 Raimondi
Key features
- Motor1,5 CV / 1,1 kW
- Maximum cutting thickness55 mm (2 1/8″) in a single pass; 65 mm (2 1/2″) in a double pass
- Cutting length90 cm (35 1/2″)
- Cutting thickness55 mm (2 1/8″) with Ø 250 mm (10″) blade
- Engine power1,5 CV – 1,1 kW
- Disc diameterØ 250 mm (10″) as standard
What it is
Saw Bolt 90 Raimondi. Key specifications: motor 1,5 CV / 1,1 kW, maximum cutting thickness 55 mm (2 1/8″) in a single pass; 65 mm (2 1/2″) in a double pass, cutting length 90 cm (35 1/2″).
A masonry saw bench is a bench-mounted machine with a diamond blade, usually water-cooled, for accurately cutting tiles, bricks, blocks and stone.
What it is for
Used for cutting ceramics and porcelain stoneware, for cutting building materials, from clay brick to concrete and for straight and shaped cuts in tiles and porcelain stoneware.
How to use it
Set the machine on a level surface, fill the water tray if fitted and check that the blade is suited to the material and fitted in the direction of rotation. Place the workpiece on the sliding table against the fence, start the blade and feed it into the material without forcing. Connect it to a socket protected by an RCD, wear safety glasses and ear defenders, and clean the slurry out of the tray at the end of the day.
Where it is used
- Commercial construction
- Residential construction
- Renovation
Technical data
- Motor: 1,5 CV / 1,1 kW
- Maximum cutting thickness: 55 mm (2 1/8″) in a single pass; 65 mm (2 1/2″) in a double pass
- Cutting length: 90 cm (35 1/2″)
- Cutting thickness: 55 mm (2 1/8″) with Ø 250 mm (10″) blade
- Engine power: 1,5 CV – 1,1 kW
- Disc diameter: Ø 250 mm (10″) as standard
Who it is for
Designed for construction workers, flooring and paving contractors, tilers and floor layers.
Related products
- Saw ECO 92 Raimondi
- Saw Bolt 150 Raimondi
- Diamond discs Raimondi — from the category Diamond Blades
- Cer Cinque Laser diamond disc for ceramic Sea Technology — from the category Discs for Ceramics
- Ear defenders Classic Plus PW Portwest PW48 — from the category Ear Defenders and Earplugs
- Browse the whole category: Sawing Machines
Before you order
In your request, please state the length, the diameter, the power rating and the quantities required, so we can give you the right quotation first time.
For prices and availability, request a quote from AMES Srl: we will reply with our quotation, delivery times and, where needed, an equivalent technical alternative.
Quantity
Specifications 6
| Motor | 1,5 CV / 1,1 kW |
|---|---|
| Maximum cutting thickness | 55 mm (2 1/8″) in a single pass; 65 mm (2 1/2″) in a double pass |
| Cutting length | 90 cm (35 1/2″) |
| Cutting thickness | 55 mm (2 1/8″) with Ø 250 mm (10″) blade |
| Engine power | 1,5 CV – 1,1 kW |
| Disc diameter | Ø 250 mm (10″) as standard |
The perfect setup for this job
Everything you need in one place, from functionality to safety.
For the job
RaimondiDiamond discs for angle grinders RaimondiCode DISCHI-DIAMANTATI-PER-SMERIGLIATRICE-ANGOLARE
Cut tiles, porcelain stoneware and ceramic with clean edges and minimal chipping.
For safety
NeriHeadband ear defenders Optime II H520A Neri 122346Code 122346
Protect hearing from the noise of machines and tools by reducing the sound reaching the ear.
NeriPolycarbonate safety spectacles Polysafe Neri 162074Code 162074
Protect eyes and face from fragments, dust, splashes and impacts.
PortwestDust mask with valve FFP3 (PK10) Portwest P311Code P311
Protect the airways from dust, fumes, gases and vapours during work.