Concrete screw Tapcon Xtrem Csk SPIT

What it is

Concrete screw Tapcon Xtrem Csk SPIT. Key specifications: thread diameter (mm) 6 - 14, drilling hole diameter (mm) 6 - 14, total anchor length (mm) 50 - 170.

A concrete screw is a screw anchor that is driven directly into the hole in concrete or masonry, cutting its own thread, without a plug.

What it is for

Used for anchoring shelves, brackets and structures to walls and for mechanical fixing of structures and components to walls, ceilings and floors.

How to use it

Drill with a bit of the diameter specified for the screw to the required depth and clean the hole thoroughly. Drive the screw through the part being fixed with a spanner or impact driver until it is seated, without overtightening. Observe the edge distances and hole spacings stated in the technical data sheet.

Where it is used

• Industrial construction
• Residential construction

Technical data

• Thread diameter (mm): 6 - 14
• Drilling hole diameter (mm): 6 - 14
• Total anchor length (mm): 50 - 170
• Anchoring depth: 40-115 mm (depending on model)
• Installation torque: 10-16.6 Nm (depending on diameter)
• Material/coating: Galvanised steel (zinc-coated steel)
• Design shear strength, C20/25–C50/60 (kN): 5,6 - 44,8
• Fire resistance R30–R120: Reduced capacity; Ø14 at R30: 10.3 kN (tensile), up to 4.8 kN at R120
• Minimum concrete thickness (mm): 80 - 138
• Characteristic centre distance Scr (mm): 120 - 345
• Edge distance ccr (mm): 60 - 172,5
• Regulations/approvals: ETA-16/0276, seismic approval C1 & C2, fire approval (R30-R120)

Who it is for

Designed for electricians, metal fabricators and plumbers.

Related products

• Concrete screw Tapcon Xtrem Hfl SPIT
• Concrete screw Tapcon ROD for threaded rods SPIT
• Drill bit XT 2 SPIT — from the category Drill Bits for Granite, Masonry and Concrete
• Impact driver 10.8V Li-ion 1.5Ah FMC040LB Stanley — from the category Impact Drivers (Hex Drive)
• Magnetic hex-shank nut driver Shockwave 5.5 x 65 mm Milwaukee 4932492434 — from the category Impact Sockets
• Browse the whole category: Concrete Screws (Screw Anchors)

Before you order

In your request, please state the length, the diameter and the quantities required, so we can give you the right quotation first time.

For prices and availability, request a quote from AMES Srl: we will reply with our quotation, delivery times and, where needed, an equivalent technical alternative.