SPITSDS-Plus bit XT 3 with 3 cutting edges for concrete SPIT
Drill concrete, brick and stone for wall plugs and anchors using a hammer drill.
Accessories collection:Drill Bits for Granite, Masonry and ConcreteHammer Drills, Drill Drivers and Rotary HammersScrewdriving Inserts and Bits
All SPIT products
Concrete screw Tapcon Hfl SPIT
Key features
- Available diametersØ5, Ø6 mm
- Anchoring depth (mm)25 - 55
- Total anchor length (mm)28 - 60
- Drilling diameter (mm)5 - 6
- Minimum base thickness80-100 mm (depending on size)
- Installation torqueØ5: 8 Nm; Ø6: 10 Nm
What it is
Concrete screw Tapcon Hfl SPIT. Key specifications: anchoring depth (mm) 25 - 55, total anchor length (mm) 28 - 60, drilling diameter (mm) 5 - 6.
A concrete screw is a screw anchor that is driven directly into the hole in concrete or masonry, cutting its own thread, without a plug.
What it is for
Used for anchoring shelves, brackets and structures to walls and for mechanical fixing of structures and components to walls, ceilings and floors.
How to use it
Drill with a bit of the diameter specified for the screw to the required depth and clean the hole thoroughly. Drive the screw through the part being fixed with a spanner or impact driver until it is seated, without overtightening. Observe the edge distances and hole spacings stated in the technical data sheet.
Where it is used
- Industrial construction
- Residential construction
Technical data
- Anchoring depth (mm): 25 - 55
- Total anchor length (mm): 28 - 60
- Drilling diameter (mm): 5 - 6
- Minimum base thickness: 80-100 mm (depending on size)
- Installation torque: Ø5: 8 Nm; Ø6: 10 Nm
- Design shear strength: Ø5: 3,5 kN; Ø6 (35 mm): 5,6 kN; Ø6 (55 mm): 5,6 kN
- Material/coating: Galvanised steel
- Regulations/approvals: ETA-16/0373, ETA-17/0174 (cracked and non-cracked concrete, including hollow-core slab)
Who it is for
Designed for electricians, metal fabricators and plumbers.
Related products
- Concrete screw Tapcon Pan SPIT
- Concrete screw Tapcon Csk SPIT
- Drill bit R3 SPIT 88768 — from the category Drill Bits for Granite, Masonry and Concrete
- Impact driver Brushless Fatmax V20 18V - Unità Without battery and charger (SFMCF810B-XE) Stanley — from the category Impact Drivers (Hex Drive)
- Impact universal joint Fervi JI403N — from the category Impact Sockets
- Browse the whole category: Concrete Screws (Screw Anchors)
Before you order
In your request, please state the length, the diameter and the quantities required, so we can give you the right quotation first time.
For prices and availability, request a quote from AMES Srl: we will reply with our quotation, delivery times and, where needed, an equivalent technical alternative.
Quantity
Specifications 10
| Available diameters | Ø5, Ø6 mm |
|---|---|
| Anchoring depth (mm) | 25 - 55 |
| Total anchor length (mm) | 28 - 60 |
| Drilling diameter (mm) | 5 - 6 |
| Minimum base thickness | 80-100 mm (depending on size) |
| Installation torque | Ø5: 8 Nm; Ø6: 10 Nm |
| Design shear strength | Ø5: 3,5 kN; Ø6 (35 mm): 5,6 kN; Ø6 (55 mm): 5,6 kN |
| Material/coating | Galvanised steel |
| Head types available in the range | HFL, CSK, PAN, DOME, ROD |
| Regulations/approvals | ETA-16/0373, ETA-17/0174 (cracked and non-cracked concrete, including hollow-core slab) |
The perfect setup for this job
Everything you need in one place, from functionality to safety.
For the job
DeWaltMagnetic hex socket 50mm DeWalt DT7402-QZCode DT7402-QZ
Transmit the torque of the impact driver to nuts and bolts without breaking.
MilwaukeeImpact driver M12 FUEL ¼″ hex drive FID2 Milwaukee
Drive and remove stubborn screws and bolts with rotary impacts, using bits or sockets.
SPITSDS-Plus bit XT 3 for concrete SPIT 88762
Drill and chisel concrete and masonry with the quick-release fitting of light rotary hammers.