Pump out and transfer dirty water containing light sludge, suspended solids and wastewater.

Plug-in timer for blowers Rototec
Also known as: timer plug, socket timer
Key features
- Voltage230 VAC, 50 Hz
- Channels1
- Switching power16 A at 250 VAC
- Protection ratingIP20
- ClassII (EN 60 730-1)
- Minimum step15 minutes
What it is
The plug-in timer for blowers is a plug&play timer for designers and installers that enables 24 h daily programming of ON/OFF cycles using 15-minute trippers, optimising aeration/recirculation in small wastewater treatment plants; 230 V supply. Additional key data: 1 channel, 16 A at 250 VAC, minimum step 15 min / 96 segments, IP20, class II EN 60 730-1, –40 ÷ +55 °C, self-extinguishing thermoplastic housing, mains synchronous, dimensions 71×71×41 mm.
The electrical control panel is an enclosure with protective devices and controls that powers and manages the pumps and blowers of the system, with a timer and alarm where fitted.
What it is for
Used for filtering system water and in the installation and maintenance of plumbing systems.
How to use it
It must be connected by a qualified electrician. Mount it away from water and damp, in an accessible position and clear of tanks and fumes. Set the operating parameters and check that the alarm trips. Work inside the panel only with the system disconnected from the mains.
Where it is used
- Building services
- Water engineering works
Technical data
- Voltage: 230 VAC, 50 Hz
- Channels: 1
- Switching power: 16 A at 250 VAC
- Protection rating: IP20
- Class: II (EN 60 730-1)
- Minimum step: 15 minutes
- Segments: 96
- Operating temperature: –40 ÷ +55 °C
- Height (mm): 71
- Length (mm): 71
- Depth (mm): 41
- Accuracy: Mains synchronisation
- Container material: Self-extinguishing thermoplastic
Who it is for
Designed for plumbers.
Standards and safety
EN 60 730 1 (Class II); degree of protection IP20
Related products
- Non-return valve Rototec
- Lifting station Teknosol, double pump, Rototec
- Round inspection chamber with tap — from the category Inspection Chambers
- Submersible pump SP 9.500 Dirt Kärcher — from the category Submersible Wastewater Pumps
- Single-Phase Starter Friggeri FR-SMM/I — from the category Distribution Boards and Protection Devices
- Browse the whole category: Water Purification
Before you order
In your request, please state the length, the supply voltage, the power rating and the quantities required, so we can give you the right quotation first time.
For prices and availability, request a quote from AMES Srl: we will reply with our quotation, delivery times and, where needed, an equivalent technical alternative.
Specifications 13
| Voltage | 230 VAC, 50 Hz |
|---|---|
| Channels | 1 |
| Switching power | 16 A at 250 VAC |
| Protection rating | IP20 |
| Class | II (EN 60 730-1) |
| Minimum step | 15 minutes |
| Segments | 96 |
| Operating temperature | –40 ÷ +55 °C |
| Height (mm) | 71 |
| Length (mm) | 71 |
| Depth (mm) | 41 |
| Accuracy | Mains synchronisation |
| Container material | Self-extinguishing thermoplastic |
The perfect setup for this job
Everything you need in one place, from functionality to safety.
For the job
Pump out muddy water with sand and debris from excavations, sumps and flooded rooms.
Eliminate or mask bad odours from portable toilets, waste, drains and rooms.
Distribute power on site and protect people and tools from overloads and earth leakage.
For safety
Protect hands from cuts, impacts, heat, cold and chemicals.





