Carry water for irrigating, washing and supplying machines in the garden and on site.

Wastewater lifting station SAR 550 Pedrollo
Also known as: sewage pumping station, lift station, pumping station
Key features
- CapacityFino a 750 l/min (con pompa singola)
- HeadUp to 26 m
- Liquid temperatureUp to +40 °C
- Tank capacity550 litri
- Collection pipe connectionDN 110
- Delivery pipe connection1 1/2" – 1 1/4" (per TIG e TR 0.9-1.1-1.3) – 2" (per VX /50 e BC)
What it is
Wastewater lifting station SAR 550 Pedrollo. Key specifications: head Up to 26 m, liquid temperature Up to +40 °C, collection pipe connection DN 110.
A dirty water pump is an electric pump or engine-driven pump that draws water containing mud, sand or solids from excavations, sumps, tanks and flooded rooms.
What it is for
Used for water drainage, in the installation and maintenance of plumbing systems and for pumping water out of excavations, tanks and sumps.
How to use it
Lower the submersible pump to the lowest point, suspended by a rope attached to the handle (never by the cable), and rest it on firm ground; set the engine-driven pump on a level surface, prime it by filling the pump casing with water and immerse the suction hose with its strainer. Connect the delivery hose without kinks, start the pump and check that it does not run dry. After use, run it in clean water to flush it out.
Where it is used
- Commercial construction
- Residential construction
- Building services
Technical data
- Head: Up to 26 m
- Liquid temperature: Up to +40 °C
- Collection pipe connection: DN 110
- Power cable (m): 10
Who it is for
Designed for plumbers and heating and plumbing engineers.
Related products
- Wastewater lifting station SAR 40 Pedrollo
- Wastewater lifting station SAR 250 Pedrollo
- Microtube 4 mm art. 2772 — from the category Water Hoses and Layflat Hoses
- PTO generator for tractor TG25/15 IP23 Pramac — from the category Portable and Wheeled Generating Sets
- Jute rope — from the category Synthetic Ropes and Lines
- Browse the whole category: Electric and Engine-Driven Pumps for Dirty Water and Wastewater
Before you order
In your request, please state the connection type and the quantities required, so we can give you the right quotation first time.
For prices and availability, request a quote from AMES Srl: we will reply with our quotation, delivery times and, where needed, an equivalent technical alternative.
Specifications 7
| Capacity | Fino a 750 l/min (con pompa singola) |
|---|---|
| Head | Up to 26 m |
| Liquid temperature | Up to +40 °C |
| Tank capacity | 550 litri |
| Collection pipe connection | DN 110 |
| Delivery pipe connection | 1 1/2" – 1 1/4" (per TIG e TR 0.9-1.1-1.3) – 2" (per VX /50 e BC) |
| Power cable (m) | 10 |
The perfect setup for this job
Everything you need in one place, from functionality to safety.
For the job
Clamp hoses, sleeves and cables to secure them to fittings and supports.
Join pipes and components of water systems with threaded joints and reducers.
Bring power to site tools through protected connections, including outdoors.
For safety
Protect feet from water, mud, crushing and nails thanks to the toecap and midsole plate.





