A.M.E.S. srlNon-toxic coiled hose
Carry water for irrigating, washing and supplying machines in the garden and on site.
All Pedrollo products
Submersible pump BC4 Pedrollo
Also known as: submersible pump
Key features
- CapacityUp to 1200 l/min (72 m³/h)
- Motor4-pole
- Motor casingStainless steel AISI 304
- ShaftAISI 431 stainless steel
- HeadUp to 6 m
- Liquid temperatureUp to +40 °C
What it is
Submersible pump BC4 Pedrollo. Key specifications: capacity Up to 1200 l/min (72 m³/h), motor 4-pole, motor casing Stainless steel AISI 304.
A dirty water pump is an electric pump or engine-driven pump that draws water containing mud, sand or solids from excavations, sumps, tanks and flooded rooms.
What it is for
Used for water drainage and for pumping water out of excavations, tanks and sumps.
How to use it
Lower the submersible pump to the lowest point, suspended by a rope attached to the handle (never by the cable), and rest it on firm ground; set the engine-driven pump on a level surface, prime it by filling the pump casing with water and immerse the suction hose with its strainer. Connect the delivery hose without kinks, start the pump and check that it does not run dry. After use, run it in clean water to flush it out.
Where it is used
- Water engineering works
- Civil protection
Technical data
- Capacity: Up to 1200 l/min (72 m³/h)
- Motor: 4-pole
- Motor casing: Stainless steel AISI 304
- Shaft: AISI 431 stainless steel
- Head: Up to 6 m
- Liquid temperature: Up to +40 °C
- Solids passage: Up to Ø 50 mm
- Maximum operating depth: Up to 10 m (with a suitably long power cable)
- Minimum immersion for continuous duty (mm): 500
- Protection: IP68
- Pump body: Cast iron
- Impeller: Cast iron
Who it is for
Designed for plumbers.
Related products
- Submersible pump FAMILY Pedrollo
- Submersible pump BC-ST Pedrollo
- Hose with galvanised steel spiral — from the category Water Hoses and Layflat Hoses
- Generator RG10000HS Genmac — from the category Portable and Wheeled Generating Sets
- Jute rope, 55 g/m, 200 m reel, 8 mm, Vigor — from the category Synthetic Ropes and Lines
- Browse the whole category: Electric and Engine-Driven Pumps for Dirty Water and Wastewater
Before you order
In your request, please state the rated load or flow rate and the quantities required, so we can give you the right quotation first time.
For prices and availability, request a quote from AMES Srl: we will reply with our quotation, delivery times and, where needed, an equivalent technical alternative.
Quantity
Specifications 13
| Item code | BC4 |
|---|---|
| Capacity | Up to 1200 l/min (72 m³/h) |
| Motor | 4-pole |
| Motor casing | Stainless steel AISI 304 |
| Shaft | AISI 431 stainless steel |
| Head | Up to 6 m |
| Liquid temperature | Up to +40 °C |
| Solids passage | Up to Ø 50 mm |
| Maximum operating depth | Up to 10 m (with a suitably long power cable) |
| Minimum immersion for continuous duty (mm) | 500 |
| Protection | IP68 |
| Pump body | Cast iron |
| Impeller | Cast iron |
The perfect setup for this job
Everything you need in one place, from functionality to safety.
For the job
UnifixHose clamp 12 mm stainless steel band and W2 galvanised s...Code 0535-016-25-01
Clamp hoses, sleeves and cables to secure them to fittings and supports.
A.M.E.S. srlBrass T-connector art. 296
Join pipes and components of water systems with threaded joints and reducers.
FriggeriCable reel 25 m 5x2.5 mm² with 1 CEE 3P+N+T 16A socket an...Code AV-1010025G25/66
Bring power to site tools through protected connections, including outdoors.
For safety
NeriSafety boot Car. OB E SR Neri 575043Code 575043
Protect feet from water, mud, crushing and nails thanks to the toecap and midsole plate.