A.M.E.S. srlHose with galvanised steel spiral
Carry water for irrigating, washing and supplying machines in the garden and on site.
All Pedrollo products
Submersible pump TRITUS Pedrollo
Also known as: submersible pump
Key features
- ProtectionIP68
- CapacityUp to 430 l/min (25.8 m³/h)
- HeadUp to 55 m
- Liquid temperatureUp to +40 °C
- Maximum operating depthUp to 10 m (with a suitably long power cable)
- Minimum immersion for continuous duty300 mm for 0.75, 0.9, 1.1, 1.3 – 350 mm for 1.5, 2.2, TR 2.2 AP
What it is
Submersible pump TRITUS Pedrollo. Key specifications: protection IP68, capacity Up to 430 l/min (25.8 m³/h), head Up to 55 m.
A dirty water pump is an electric pump or engine-driven pump that draws water containing mud, sand or solids from excavations, sumps, tanks and flooded rooms.
What it is for
Used for water drainage and for pumping water out of excavations, tanks and sumps.
How to use it
Lower the submersible pump to the lowest point, suspended by a rope attached to the handle (never by the cable), and rest it on firm ground; set the engine-driven pump on a level surface, prime it by filling the pump casing with water and immerse the suction hose with its strainer. Connect the delivery hose without kinks, start the pump and check that it does not run dry. After use, run it in clean water to flush it out.
Where it is used
- Water engineering works
- Civil protection
Technical data
- Protection: IP68
- Capacity: Up to 430 l/min (25.8 m³/h)
- Head: Up to 55 m
- Liquid temperature: Up to +40 °C
- Maximum operating depth: Up to 10 m (with a suitably long power cable)
- Minimum immersion for continuous duty: 300 mm for 0.75, 0.9, 1.1, 1.3 – 350 mm for 1.5, 2.2, TR 2.2 AP
- Motor: 2-pole
- Pump body: Cast iron
- Impeller: Technopolymer (TR 0.75-0.9-1.1-1.3) / AISI 304 cast stainless steel
- Motor mount: Cast iron
- Drive shaft: Stainless steel AISI 431
- Grinder: Hardened AISI 440C stainless steel
Who it is for
Designed for plumbers.
Related products
- Submersible pump TRITUS-INOX Pedrollo
- Submersible pump TOP-VORTEX Pedrollo
- High-pressure hose for agricultural use — from the category Water Hoses and Layflat Hoses
- Inverter generating set 2.5 kW P3000i Pramac — from the category Portable and Wheeled Generating Sets
- High-tenacity nautical braided rope — from the category Synthetic Ropes and Lines
- Browse the whole category: Electric and Engine-Driven Pumps for Dirty Water and Wastewater
Before you order
In your request, please state the rated load or flow rate and the quantities required, so we can give you the right quotation first time.
For prices and availability, request a quote from AMES Srl: we will reply with our quotation, delivery times and, where needed, an equivalent technical alternative.
Quantity
Specifications 12
| Protection | IP68 |
|---|---|
| Capacity | Up to 430 l/min (25.8 m³/h) |
| Head | Up to 55 m |
| Liquid temperature | Up to +40 °C |
| Maximum operating depth | Up to 10 m (with a suitably long power cable) |
| Minimum immersion for continuous duty | 300 mm for 0.75, 0.9, 1.1, 1.3 – 350 mm for 1.5, 2.2, TR 2.2 AP |
| Motor | 2-pole |
| Pump body | Cast iron |
| Impeller | Technopolymer (TR 0.75-0.9-1.1-1.3) / AISI 304 cast stainless steel |
| Motor mount | Cast iron |
| Drive shaft | Stainless steel AISI 431 |
| Grinder | Hardened AISI 440C stainless steel |
The perfect setup for this job
Everything you need in one place, from functionality to safety.
For the job
UnifixHose clamp 12 mm band and W4 stainless steel screw UnifixCode 0535-216-25-01
Clamp hoses, sleeves and cables to secure them to fittings and supports.
A.M.E.S. srlGalvanised steel socket F/F art. 308
Join pipes and components of water systems with threaded joints and reducers.
FriggeriCable reel 30 m 3x2.5 mm² with 1 CEE 2P+T 16A socket and ...Code AV-0011030G25/44
Bring power to site tools through protected connections, including outdoors.
For safety
NeriSafety boot Car. OB E SR Neri 575043Code 575043
Protect feet from water, mud, crushing and nails thanks to the toecap and midsole plate.